In brief, replacing the alternator on a 2015 Chrysler 200 typically costs around $300 to $650 total, depending on part choice and labor rates.
The final price depends on whether you buy a remanufactured aftermarket unit, a new aftermarket unit, or a factory OEM Mopar part, as well as local labor charges. The engine option (2.4L I4 vs. 3.6L V6) can also influence both part price and replacement time. Below is a breakdown to help you estimate costs and plan your repair.
What drives the price
Key cost drivers
Several factors determine the total cost of an alternator replacement for the Chrysler 200. Understanding these helps you compare quotes and choose a level of parts quality that fits your budget.
- Engine variant (2.4L I4 vs 3.6L V6) affecting alternator size and price
- Part type (remanufactured aftermarket vs new aftermarket vs OEM/Mopar)
- Retailer and warranty terms (discounts, return policy, and warranty length)
- Labor rates and time (regional differences; typical replacement takes 1–3 hours)
- Core charges (some sellers require a refundable core deposit)
- Potential ancillary parts or services (belt, pulley, tensioner, or electrical tests)
Concluding: Recognizing these drivers lets you compare quotes effectively and decide among remanufactured, aftermarket, or OEM options.
Typical price ranges you should expect
Here are rough price bands for parts and, separately, labor. Prices vary by region and supplier, so use these as a guide and request written estimates.
- Remanufactured aftermarket alternator: typically $120–$240
- New aftermarket alternator: typically $180–$350
- OEM Mopar or dealer-supplied new alternator: typically $320–$600
- Core charge: often $0–$100 (some sellers waive it if you return the core)
Concluding: When you factor in labor, most total costs fall in the roughly $300–$650 range, with higher-end engines or urgent repairs pushing the total higher.
Labor considerations and installation time
Labor costs depend on local shop rates and how accessible the alternator is in your vehicle. Typical ranges include:
- Labor time: about 1–3 hours, depending on engine variant and access
- Shop labor rate: commonly $80–$150 per hour, with higher rates in urban areas
Concluding: Expect roughly $100–$350 in labor in many markets, though total could be more if belts or related components are replaced concurrently.
What to do to save money
Tips to keep costs down without compromising reliability:
- Compare remanufactured aftermarket parts vs OEM parts and check warranties
- Ask shops for a bundled quote that includes belt inspection or replacement if needed
- Check for core-charge policies and whether the core must be returned within a specific window
- Obtain multiple written estimates and confirm engine compatibility with the part before purchase
Concluding: Shopping around and choosing a qualified installer can yield meaningful savings while maintaining reliability.
Summary
For a 2015 Chrysler 200, replacing the alternator typically costs around $300 to $650, with the split between parts and labor varying by engine, part type, and local rates. Remanufactured aftermarket parts are usually the least expensive option, while OEM Mopar parts command the higher end of the price range. Labor adds another major factor, commonly 1–3 hours at prevailing shop rates. To get the best deal, compare multiple quotes, verify compatibility with your engine, and consider bundled services like belt inspection. Prices fluctuate over time and by region, so check current prices with local shops and parts retailers before proceeding.
Is it worth fixing or replacing an alternator?
If your vehicle's alternator is relatively new and has low mileage, repair may be a cost-effective solution. However, if the alternator is old or has a history of frequent problems, replacement may provide a longer-term solution and better value for money.
How long does it take to change an alternator on a Chrysler 200?
In most cases, this job takes one to two hours. The alternator attaches to the side of the engine, and is driven by a belt. To remove the alternator, the belt is removed, the wires are disconnected, and the alternator is unbolted from its bracket.
How do I know if my Chrysler 200 alternator is bad?
Dashboard warning lights turning on: If the battery warning light or other alternator warning lights appear, or you see flickering random lights, these are are all good indications to have your alternator inspected.
How much is an alternator for a 2015 Chrysler 200?
The average cost for a Chrysler 200 Alternator Replacement is between $688 and $964. Labor costs are estimated between $119 and $174 while parts are priced between $569 and $790.