Inflate all four tires to the recommended cold pressures shown on the driver’s door placard, then drive the car to trigger the TPMS relearn. If the light stays on after proper inflation, you may need to use a manual reset if your trim supports it or have the sensors checked by a technician.
What you should know about the TPMS in the 2016 Civic
The tire pressure monitoring system (TPMS) in a 2016 Honda Civic is designed to alert you when tire pressure falls outside the recommended range. In many Civics of this era, the system relearns automatically once tires are inflated correctly and you drive the vehicle for a certain distance at highway speeds. Some trims may offer a manual reset option, but not all models include a dedicated reset button. If the light remains after proper inflation and a normal drive, there could be a sensor issue or a slow leak that needs inspection.
Automatic relearn: inflate to spec and drive
If your Civic supports automatic relearning, follow these steps. The goal is to ensure each tire is at the recommended cold pressure and then give the system time and distance to reassess the tire pressures while driving.
- Check and inflate all four tires (and any spare if equipped with a TPMS sensor in some configurations) to the cold pressure listed on the door jamb placard for your vehicle.
- Inspect tires for leaks, damage, or uneven wear and address any issues before attempting to drive the car for relearn.
- Drive the car at a steady speed, preferably on a highway or freeway, at speeds around 30–50 mph (50–80 km/h) for about 10 minutes or longer until the light turns off.
- Park and turn off the engine, then restart to verify that the TPMS light remains off after the relearn cycle.
When done correctly, the TPMS indicator should extinguish after the proper pressures are detected and the system completes its relearn cycle. If the light does not go out after these steps, proceed to a manual reset (if equipped) or seek service for sensor-related issues.
Manual reset method (if your model supports it)
Some 2016 Civics offer a manual reset option for TPMS. If your vehicle has a reset control, follow these general steps. If you cannot locate a reset button or your manual does not mention TPMS reset, rely on the automatic relearn method and professional assistance.
- With the ignition in the ON position and the engine off, locate the TPMS reset button. It is commonly found under the left side of the dashboard near the steering column or in the glove box area, but placement can vary by trim.
- Press and hold the TPMS reset button for about 3–5 seconds until the TPMS indicator light blinks or changes state, then release.
- Drive at speeds above 30 mph (50 km/h) for 10 minutes or more to complete the relearn process.
- Check the dashboard to confirm that the light has turned off. If it remains illuminated, the reset may not have succeeded, and you should have the sensors and tires inspected.
Note: If you cannot find a reset button or your light does not behave as described, consult the owner’s manual for your exact trim level or visit a Honda service center for a sensor check and possible reprogramming.
When to seek service
If the TPMS light stays on after inflating to spec and performing a relearn, or if you notice any of the following, professional inspection is advised:
- Repeated or slow tire leaks that prevent maintaining proper pressure.
- TPMS sensor battery failure or damaged valves.
- Distinct tire damage or irregular wear that could affect pressure readings.
- Intermittent TPMS warnings that do not reset with inflation.
Sensor replacement and system diagnostics can vary in cost and complexity, so it’s wise to verify the exact service needs with a Honda technician or trusted tire shop.
Summary
Resetting the tire pressure light on a 2016 Honda Civic usually comes down to inflating all tires to the recommended cold pressures and driving to allow the TPMS to relearn. If the light persists, try a manual reset if your trim supports it, and verify there are no slow leaks or sensor issues. When in doubt, consult your owner’s manual or a qualified technician for an accurate diagnosis and service.