The OEM oil filter for the 2013 Honda Civic is Honda Genuine Part 15400-PLM-A01.
In detail, the 2013 Civic lineup in the United States offered two main engine options: the 1.8-liter i-VTEC (R18Z1) for most trims and, in the high-performance Si variant, a 2.4-liter engine. For most Civics with the 1.8L engine, the Honda Genuine OEM oil filter number 15400-PLM-A01 is typically listed in official catalogs and service guides. Exact part numbers can vary by market or engine code, so it’s wise to confirm with Honda’s parts lookup or your local dealer using your VIN.
Engine options and part-number basics
The two-engine setup in the 2013 Civic means that part numbers can differ depending on which engine is installed and where the vehicle was sold. The most commonly cited OEM filter for the 1.8L Civics in the U.S. is 15400-PLM-A01, but always verify against your specific engine code and regional catalog.
How to confirm the exact OEM oil filter for your car
To ensure you buy the correct filter, follow these steps before purchasing:
- Identify your engine code and trim level (R18Z1 for the 1.8L Civics; K24Z3 for the Si). This information can be found in the owner's manual or on the engine bay label.
- Use the VIN to look up the official Honda Parts Catalog or contact a Honda dealer to confirm the exact OEM part number.
- Check the oil filter packaging or the filter itself for the catalog number; Honda Genuine parts are clearly labeled with their part numbers.
- If you’re unsure, consult a dealer or an official parts portal to avoid cross-brand or incorrect-fit issues.
In practice, for most 2013 Civics in the U.S., the OEM oil filter is 15400-PLM-A01, but always verify with your vehicle’s engine code and VIN to be certain.
Buying tips and replacement guidance
When selecting an oil filter, use OEM or high-quality equivalent filters and follow the manufacturer’s service interval recommendations. The 0W-20 oil commonly used in 2013 Civics pairs with the OEM filter, and replacing the filter at the same interval as the oil helps maintain engine protection and performance. Regional variations may apply, so once again, confirm the exact part number via official catalogs if you are outside the US or have a different engine configuration.
Summary
The official Honda OEM oil filter for a typical 2013 Honda Civic is Honda Genuine Part 15400-PLM-A01, especially for the 1.8L engine models. Because engine codes and regional specifications can change the correct part number, verify with the VIN and the official Honda Parts Catalog or your local dealer to ensure you order the exact match for your vehicle.