The 2014 Dodge Avenger requires a HOAT (Hybrid Organic Acid Technology) coolant that is approved for FCA US LLC vehicles, typically Mopar HOAT orange coolant. Use a Chrysler-approved HOAT coolant and avoid GM Dex-Cool or non-approved universal formulations.
In practice, look for an orange, HOAT-type coolant that meets Chrysler/MS-9769 (or the current FCA specification). It can be purchased as a pre-diluted 50/50 mix or as concentrate to be diluted with distilled water, and you should only use products specifically labeled as Chrysler-approved for this vehicle.
Identifying the right coolant for the Avenger
Before selecting a product, understand the key requirements for your Avenger’s cooling system and how to verify compatibility.
- Choose a HOAT coolant that is approved for FCA US LLC vehicles (often labeled as Mopar HOAT or Chrysler-approved HOAT).
- Prefer an orange/amber coolant, as this color typically indicates HOAT formulations used by Chrysler, Dodge, and Jeep brands.
- Decide between pre-diluted 50/50 coolant and concentrated coolant, and follow the label guidance for dilution with distilled water if you buy concentrate.
By following these criteria, you’ll select a product that supports proper cooling system corrosion protection and longevity for your 2014 Avenger.
Maintenance and replacement guidelines
Once you have the correct coolant, these guidelines help you maintain the cooling system and plan replacements.
- Check the coolant level when the engine is cool and add the correct coolant up to the MAX line on the reservoir if needed.
- Inspect for leaks, rust, or white residue around hoses, clamps, and the radiator; address issues promptly to prevent overheating.
- When refilling or flushing, use only the Chrysler-approved HOAT coolant and avoid mixing in incompatible types; do not re-use old coolant that has been contaminated.
- Typical replacement intervals vary; many FCA vehicles benefit from a coolant service around every 5 years or 100,000 miles, but follow your owner’s manual for the exact schedule.
Adhering to these steps helps protect the cooling system from corrosion and overheating and supports engine longevity.
Where to buy and how to verify compatibility
You can procure the correct coolant from a Chrysler/Jeep/Dodge dealership, an authorized service center, or reputable auto parts retailers. When shopping, verify that the product explicitly states FCA US LLC MS-9769 or Chrysler-approved HOAT coolant on the label, and avoid generic or GM Dex-Cool formulations unless the label confirms compatibility with FCA specifications.
If in doubt, consult your dealership or a qualified technician to confirm the exact specification for your engine variant and driving conditions.
Summary
For a 2014 Dodge Avenger, use a Chrysler-approved HOAT coolant (orange/amber) that meets FCA US LLC specifications, typically MS-9769. Choose between pre-diluted or concentrate with distilled water, and avoid Dex-Cool or unapproved universal formulas. Regular checks, proper refilling, and periodic servicing will help maintain optimal cooling performance and engine longevity.
What kind of coolant does a 2014 Dodge take?
ZEREX – G05® Full Strength Concentrate Antifreeze / Coolant, 1 Gallon (Part No. ZXG051)
Does Dodge use special coolant?
Every car manufacturer, including Dodge has developed its own coolant or requires a specific coolant that is unique to individual years and models. There are several colors of coolants to help distinguish each including green, purple red, yellow, blue, and orange.
What coolant does a 2014 Dodge Avenger use?
ZEREX – G-05 Formula 50/50 Pre-Mixed RTU Antifreeze / Coolant, 1 Gallon (Part No. ZXG05RU1)
What color coolant does a Dodge Avenger take?
Prestone – Antifreeze and Coolant: 50/50 Ready-to-Use, Original Equipment European Teal, 1 Gallon (Part No. AF6100)