Inflate tires to the recommended cold pressures and either drive to relearn the system automatically or use a manual reset method if your model supports it. The exact steps depend on the model year and trim.
Understanding TPMS and why you might need to reset
The Tire Pressure Monitoring System (TPMS) keeps track of each tire’s air pressure and alerts you if a tire is underinflated. A reset is typically needed after inflating tires, rotating wheels, or replacing sensors or tires. If the system can’t relearn automatically, you may need a manual procedure or a sensor inspection.
Automatic relearn by driving (most Equinox models)
Many Equinox models auto-relearn the TPMS once all tires are inflated to spec and you drive at highway speeds. Use this method first before attempting a manual reset.
- Ensure all tires are inflated to the recommended cold pressures (check the placard on the door jamb or in the owner’s manual).
- Start the vehicle and drive on a smooth road at about 50 mph (80 km/h) or higher for roughly 10 minutes.
- Watch the TPMS indicator: on a successful relearn, the warning light will stop blinking and stay off or return to its normal state.
Driving at the correct speeds helps the system map the position of each sensor. If the light remains on after a highway drive, there may be a sensor issue or a tire leak that needs inspection.
Manual TPMS relearn options (when automatic relearn isn’t working)
If your Equinox supports a manual relearn, you can trigger it via the instrument cluster or a dedicated TPMS reset procedure. The exact path depends on model year and trim.
Via the instrument cluster or vehicle settings
Use the dash menu to initiate a TPMS relearn. The steps below cover the typical flow on many GM vehicles; your screen may vary slightly.
- Inflate all tires to the recommended cold pressures.
- Turn the ignition to ON with the engine off.
- Navigate to Vehicle Settings or TPMS/Tire Pressure in the dash menu.
- Select Relearn TPMS or Tire Pressure Relearn and confirm.
- The TPMS light may flash during the relearn; continue driving for about 10 minutes at highway speed to complete the process.
If the dashboard shows a message confirming the relearn, you’re done. If not, proceed to a road trip or try the button method below.
Using a dedicated TPMS reset button (if equipped)
Some Equinox models include a physical TPMS reset button or a hidden button under a panel. If your vehicle has one, use the following general steps, keeping in mind location can vary by year.
- Make sure all tires are inflated to the correct pressures.
- With the ignition ON and the engine OFF, press and hold the TPMS reset button for several seconds until the indicator light blinks or you hear a chime.
- Release and start driving. Drive for about 10 minutes at 50 mph to complete the relearn.
Because button location and behavior vary, refer to your owner’s manual to locate the reset button for your exact model year. If the light persists, sensor faults require professional diagnosis.
When to seek professional help
If the Service Tire Monitor message does not go away after the above steps, or you notice tire pressure fluctuations, sensor damage, or a warning from the system, it’s wise to visit a GM dealer or tire shop. They can scan with an OEM tool and reprogram or replace faulty sensors as needed.
Summary
Resetting the Service Tire Monitor System on a Chevy Equinox typically involves two paths: automatic relearn by driving with tires inflated to the correct pressures, and manual relearn via the instrument cluster or a TPMS reset button if your model supports it. Always verify tire pressures first, and be prepared to seek professional help if the warning persists.
How to reset service tire monitor system Chevy Equinox 2012?
And turn off the car. And then turn the ignition to the on. Position um but don't start the car. Once you have that you're going to want to come over here. And press menu.
How do you clear the service tire monitor system on a Chevy Equinox?
Yes, you can attempt to reset your Chevy Service Tire Monitor System yourself by adjusting the air levels in your tires, taking your vehicle for a short drive, and then turning the engine off and back on. If the TPMS light does not reappear, you'll know you've fixed your tire pressure issue.
Where is the TPMS reset button on the 2018 Equinox?
There is an actual TPMS Reset button that you'll need to find. Its exact location can vary, but it should be located near the dashboard or just beneath your steering wheel. If you can't seem to find it, you should consult your owner's manual, as it should be able to tell you exactly where it is.
How to clear service tire monitor system Chevy?
First, try to fill up your tires with air and see if the TPMS light goes off. If not, drive around for 5-10 minutes at a minimum of 50 MPH. Turn your car off, and then turn the key to the “On” position without starting the car. Hold down the TPMS reset button until you see the tire pressure light blink three times.