The Maintenance Minder on most Honda models lets you reset the oil-life indicator after service, returning it to 100%. In many cars this is done with the ignition on (engine off) and the SELECT/RESET button in the instrument cluster. Exact steps can vary by model and year, so always check your owner’s manual if the steps below don’t match your car.
This article provides a concise, model-aware guide to resetting maintenance reminders on popular Honda models, with general steps that work for many recent year cars and model-specific notes for Civic, Accord, CR-V, and Pilot. Use the sections that match your vehicle and year for the most accurate procedure.
Understanding Honda’s Maintenance Minder system
Honda’s Maintenance Minder uses a calculated oil-life percentage and maintenance codes to remind you of service needs. After performing maintenance (such as an oil change), you reset the oil life to 100% so the system can accurately track when the next service is due. The reset process is intentionally simple but can differ slightly between generations and trim levels.
General reset procedure that works on many Honda models
These steps cover the common reset method used on a broad range of recent Hondas. If your model uses a different control layout, adapt by locating the Oil Life or Maintenance Minder display and the SELECT/RESET control.
- Turn the ignition to ON with the engine OFF.
- Display the Oil Life or Maintenance Minder screen using the instrument-cluster controls (INFO/Menu or the SELECT/RESET knob).
- Press and hold the SELECT/RESET button until the Oil Life resets to 100% or you see a reset confirmation.
- Turn the ignition OFF, then start the engine to confirm the indicator is cleared and shows 100% Oil Life.
Note: Some models require you to press and hold the reset for 2–3 seconds, or to first select the “Oil Life” option before holding RESET. If you don’t see 100% after holding the button, repeat the steps or consult the owner’s manual for model-specific nuances.
Model-specific reset procedures
Civic (modern, 2016–2024/2025) Maintenance Minder reset
For Civics equipped with Maintenance Minder, use the instrument panel controls and the SELECT/RESET knob to reset Oil Life after service. The steps are similar across most recent Civics but may vary slightly by trim and year.
- Turn the ignition ON, engine OFF.
- Navigate to the Oil Life or Maintenance Minder display using the INFO/Menu controls or the selector knob.
- Press and hold the SELECT/RESET knob until the Oil Life reads 100% or a reset message appears.
- Turn the ignition OFF, then start the engine to verify the display shows 100% Oil Life.
If your Civic uses a different screen layout, consult the owner’s manual for the exact sequence, as some trims show a multi-information display menu instead of a simple Oil Life screen.
Accord (2018–2024/2025) Maintenance Minder reset
Accord models with Maintenance Minder follow the same core reset logic. If your car has a digital display, locate the Oil Life option and use the reset control as described.
- Ignition ON, engine OFF.
- Access the Oil Life/Maintenance Minder display via the instrument cluster or multi-information display.
- Hold the SELECT/RESET control until Oil Life returns to 100% (or you see a reset indication).
- Turn OFF, then start to confirm the reset outcome.
If the display doesn’t reset after a few seconds, try again, or check for any active service codes that might prevent resetting.
CR-V (2017–2024/2025) Maintenance Minder reset
CR-Vs with Maintenance Minder typically use the same reset method as other modern Hondas, but some early CR-Vs use a slightly different menu path. Use the general approach first, then adjust to your specific screen if needed.
- Turn ignition to ON with engine OFF.
- Show Oil Life or Maintenance Minder on the dashboard screen.
- Press and hold the SELECT/RESET button until Oil Life hits 100% or a confirmation appears.
- Turn the ignition OFF, then start to verify the reset.
If your CR-V’s screen requires you to first enter a “Maintenance” or “Minder” menu before resetting, follow that path and then perform the reset.
Pilot (2016–2024/2025) Maintenance Minder reset
Pilots with Maintenance Minder follow the same general reset steps. If your panel uses a different navigation path, aim to display Oil Life and use the reset control as described below.
- Ignition ON, engine OFF.
- Navigate to the Oil Life/Maintenance Minder display.
- Hold the SELECT/RESET button until Oil Life resets to 100% or a reset confirmation appears.
- Turn the ignition OFF and restart to confirm the reset.
As with other models, if the indicator does not reset, recheck the steps or refer to the owner’s manual for the exact path on your year/trim.
Troubleshooting tips
If you can’t reset the maintenance minder, try these quick checks before scheduling service:
- Ensure the engine is OFF during the reset process; attempting with the engine running can prevent reset.
- Use the correct control (SELECT/RESET knob) and follow the on-screen prompts exactly as shown.
- Reset may be blocked if there are active maintenance codes or service reminders that require dealer intervention; check for messages on the display.
- Consult the owner’s manual for model-specific instructions, as some trims display the Oil Life screen differently or require a longer press.
If problems persist, a quick dealer or auto shop visit can verify the system status and perform any necessary resets using the vehicle’s diagnostic tools.
Summary
Resetting Honda maintenance reminders is typically a straightforward in-dash operation: show the Oil Life or Maintenance Minder on the instrument cluster, press and hold the SELECT/RESET control until Life returns to 100%, then verify by restarting the vehicle. While the broad method is consistent across many modern Honda models, the exact menu paths can vary by year and trim. Always refer to your owner’s manual for model-specific steps, and contact a dealer if the reset doesn’t take or if you see persistent maintenance messages.
How to reset maintenance light on 2020 Honda?
Okay now this will pull up your menu. We're going to go to the wrench. Right here push enter the center. Button. Now you're going to push enter.
How do I clear my Honda maintenance message?
How to Reset Honda Maintenance Light
- Start on the Home Screen.
- Click Settings.
- Find “Vehicle” Tab & Click.
- Click “Maintenance Info”
- Select “Reset Items”
- Click “All Due Items”
How do I reset a Honda Civic maintenance light?
Newer Honda Civic/Honda Accord Models
- Turn your Honda Civic or Honda Accord on without starting the engine.
- On your steering wheel, press the “Menu” button until “Oil Life” appears on your screen.
- Press and hold the “Enter” button on your steering wheel until the “Maintenance Reset” menu appears.
How do I turn off maintenance mode on my Honda?
So vehicle's off what you're going to do is you're going to push the button without your foot on the brake. One two all the lights will come up on the dashboard. Still says maintenance mode at this