The Maintenance Minder on a 2017 Honda Civic can be reset after you complete scheduled maintenance, such as an oil change, to ensure reminders reflect the new service interval. The reset is performed using the instrument display and the SEL/RESET button with the ignition in the ON position and the engine off.
Step-by-step reset procedure
The following steps describe the standard reset sequence used by most 2017 Civics with the Maintenance Minder display and SEL/RESET control.
- Turn the ignition to ON (II) with the engine off. Do not start the engine.
- Display Engine Oil Life on the multi-information display by using the selector/INFO control on the steering wheel until Engine Oil Life is shown.
- Press and hold the SEL/RESET button until the oil life indicator begins to blink.
- Release the button, then press and hold again until the oil life resets to 100% and stops blinking.
- Turn the ignition off, then start the engine to verify that the Maintenance Minder has been reset and is functioning normally.
After completing the steps, the system should display 100% Oil Life and resume the normal maintenance reminders. If the indicator does not blink or reset, recheck that you’re in the Engine Oil Life display, that the ignition is in ON (II) with the engine off, and try the sequence again. If issues persist, consult the owner’s manual or a Honda dealer for assistance.
Notes and tips
Before attempting a reset, confirm that maintenance work has actually been performed. Resetting without service can cause the reminders to be inaccurate. Some trim levels or model years may have a slightly different button layout, but the basic method remains the same.
- The SEL/RESET button is typically located on or near the instrument cluster or steering wheel; look for a button labeled “SELECT/RESET” or “SEL/RESET.”
- A successful reset is confirmed when Engine Oil Life shows 100% and stops blinking after the second press-and-hold cycle.
- Always verify by turning the ignition off and back on, then starting the engine to ensure the system is functioning correctly.
These notes help ensure the reset is performed correctly and that the vehicle’s maintenance schedule remains accurate.
Summary
Resetting the Maintenance Minder on the 2017 Honda Civic is a quick, display-driven process that relies on the SEL/RESET button and the Engine Oil Life readout. After service, set ignition to ON (II), navigate to Engine Oil Life, hold SEL/RESET until blinking, then reset to 100% and verify by starting the engine. If you encounter problems, consult the owner’s manual or contact a Honda dealer for guidance.