The front driver-side blade is 26 inches and the front passenger-side blade is 17 inches; the rear wiper blade is 12 inches.
For the 2014 Honda CR-V, the standard blade sizes are 26" and 17" for the front, plus a 12" rear blade. This guide explains the measurements, how to verify them, and practical tips for selecting OEM or aftermarket replacements.
Front Wiper Blade Sizes
Front wipers are the primary components that clear the windshield. On the 2014 CR-V, the two blades are different lengths to accommodate the driver's and passenger's sides.
- Driver-side wiper blade: 26 inches
- Passenger-side wiper blade: 17 inches
When shopping for front blades, you’ll typically see sets labeled as 26"/17" or kits that fit Honda CR-V models from around 2012–2014. Be sure to match the length to the correct side and ensure connector compatibility with your vehicle.
Verifying and Choosing the Right Blades
Check the blade labels, the owner's manual, or the blade currently installed to confirm the sizes. Many aftermarket sets list compatibility with 2012–2014 CR-V models and specify the 26" / 17" front configuration. If unsure, bring the old blade to the store for a direct comparison.
Rear Wiper Blade Size
The rear wiper clears the hatch area and is shorter than the front blades. For the 2014 CR-V, the rear blade is typically 12 inches.
- Rear wiper blade: 12 inches
Replacement rear blades follow the same verification process as the fronts: confirm length, connector type, and mounting style before purchasing. Some trims may have minor variations, so double-check if you’re ordering online.
Rear Blade Replacement Tips
Rear blades can vary by trim or market, but a 12" blade is the common specification for the 2014 CR-V. Measure the existing blade or consult the retailer’s compatibility guide to confirm.
Summary: The 2014 Honda CR-V uses 26" driver-side and 17" passenger-side front wipers, plus a 12" rear wiper. To ensure a precise fit, verify sizes in the owner's manual or on the existing blades, and choose blades with the correct connector type and mounting style. When in doubt, bring a current blade to the store or consult the retailer’s compatibility chart.