The 2016 Audi Q5 uses a fully synthetic engine oil that meets Volkswagen/Audi specifications. For most gasoline 2.0-liter engines, use 5W-40 oil that meets VW 502.00 (some markets also use 504.00). For the 3.0-liter TDI diesel, use 5W-40 oil that meets VW 507.00. Always verify the exact spec in your owner's manual or with an Audi dealer, as requirements can vary by market and engine code.
Oil types by engine variant
The following section outlines the recommended oil for the two main powertrain options found in the 2016 Q5. Climate, service plan, and specific engine code can influence the exact specification, so always cross-check official documentation for your car.
- Gasoline: 2.0L TFSI (and similar 2.0 engines in the Q5) — use a fully synthetic oil that meets VW spec 502.00 (older specifications may use 504.00 in some markets). Common viscosity choices are 5W-40 or 5W-30, depending on climate and drain interval. Always confirm the approved grade and spec in your manual.
- Diesel: 3.0L TDI — use a fully synthetic oil that meets VW spec 507.00, typically with a viscosity of 5W-40. Diesel drain intervals with this spec can be longer, but follow the manual for your exact model and climate.
In short, the oil recommendation depends on your engine variant and the VW/Audi specification your market requires. Use the correct specification and viscosity, and avoid mixing oils with different VW/Audi approvals.
How to confirm the exact oil spec for your car
To ensure you’re using the right oil, follow these steps. This guidance helps account for variations by market and engine code.
- Check the owner’s manual section on engine oil specifications for your exact model and engine code.
- Inspect the engine code or fuel system details, which can be found under the hood or in the vehicle information sticker.
- Look at the oil filler cap; some caps indicate the required specification or viscosity range.
- When in doubt, contact an Audi dealer or a certified service center to verify the correct oil spec and viscosity for your climate and driving conditions.
Following these steps helps ensure warranty coverage and optimal engine longevity by using the approved oil.
Summary
The 2016 Audi Q5 standardizes on fully synthetic oil that meets VW/Audi specifications. Gasoline 2.0L engines typically require 5W-40 oil meeting VW 502.00 (504.00 is listed in some markets), while the 3.0L TDI diesel uses 5W-40 oil meeting VW 507.00. Always confirm the exact specification in the owner’s manual or with an Audi dealer, as requirements can vary by engine code and market.