The clock on a 2009 Honda Odyssey can be reset by entering the clock-setting mode and adjusting the hours and minutes with the dedicated controls, then saving the changes.
In this guide, you’ll find practical steps for both the standard factory radio configuration and the navigation-equipped option, along with troubleshooting tips if the clock won’t update. Time setting methods can vary slightly by trim and radio type, so follow the steps that match your dashboard configuration.
Resetting the clock on the standard radio (non-navigation)
Use these steps if your Odyssey is equipped with the basic radio head unit without a touch-screen navigation system.
Common button configurations you may encounter
- Turn the ignition to ON. The radio and clock should power up even if the engine isn’t running.
- Press and hold the CLOCK button until the digits on the display begin to flash.
- Use the H (hour) or HR control to advance the hour. If your unit uses up/down arrows, use those to change the hour value. Pay attention to AM/PM if the display shows it.
- Use the M (minute) or MN control to advance the minutes to the correct value. Some models toggle between hour and minute by pressing the CLOCK button again, so follow the button prompts on your display.
- Press the CLOCK button again (or confirm with the on-screen prompt, if applicable) to save the new time and exit clock-setting mode.
Once saved, the clock should stop flashing and display the updated time. If the time doesn’t change, repeat the steps ensuring you properly enter the clock-setting mode first and then save.
Clock settings for navigation or touch-screen systems (if installed)
For Odyssey models that include factory navigation or a touchscreen, the time is typically adjusted through the system's settings menu rather than the radio panel.
On-screen clock settings
- Turn the ignition to ON and access the Home or Main Menu on the display.
- Navigate to Settings or Clock/Time settings. The exact path varies by software version (for example, Settings > General > Clock or Settings > Display > Time).
- Set the hour and minute values using the on-screen controls. Choose AM/PM if the option is available.
- Confirm or Save the changes, then exit the menu. The clock should update immediately.
If you can’t locate the clock setting in the navigation menu, consult the specific owner’s manual for your trim level or check Honda’s support resources for the 2009 Odyssey’s navigation software path.
Troubleshooting clock adjustments
If the clock won’t update or the buttons don’t respond, try these checks before seeking professional help.
- Verify the ignition is in ON or ACC position when attempting to adjust the clock.
- Ensure you’re using the correct button sequence for your radio/navigation configuration (CLOCK enter mode, then H/M or hour/minute controls).
- Check for a stuck or unresponsive button on the radio face; gentle cleaning around the buttons can help.
- Inspect the vehicle’s fuse(s) related to the radio/clock. If you’re unsure which fuse is involved, refer to the owner’s manual for the fuse diagram and location.
If problems persist after checking these items, a dealership or qualified technician can diagnose potential software or wiring issues related to the clock system.
Summary
Resetting the 2009 Honda Odyssey clock is a straightforward process that depends on your dashboard configuration. With the standard radio, enter clock mode via the CLOCK button and adjust hours and minutes with the dedicated controls, then save. With a navigation system, use the Settings or Clock options in the on-screen menu. If you encounter trouble, verify ignition position, button functionality, and fuse status, and consult the manual or a dealer for further assistance.