Yes. Front wiper blades on a 2017 Honda Civic are typically 26 inches on the driver’s side and 17 inches on the passenger side, and you can replace them yourself in about 10 minutes. If your Civic is a hatchback or another variant with a rear wiper, the rear blade uses a different size and procedure.
This guide explains the steps for replacing the front blades, lists what you’ll need, and notes rear-wiper considerations if your model is equipped with one. Sizes can vary by trim or aftermarket parts, so always double-check blade packaging or your owner’s manual before buying.
What you’ll need
Gather these items before you start to keep the job quick and smooth.
- Replacement wiper blades: 26" driver-side and 17" passenger-side for most 2017 Civics (verify exact sizes for your trim).
- Optional rear wiper blade if equipped (size varies by model, often around 11"–13").
- Gloves or a microfiber cloth to grip blades and protect hands.
- Isopropyl alcohol or a clean rag to wipe the wiper contact points and windshield.
- A small flat-head screwdriver (optional, only if your blades have a stubborn connector).
With the right blades, the replacement typically takes about 10–15 minutes, depending on your familiarity with the steps.
Front wiper blade replacement
The steps below are for the front blades on most 2017 Civics with standard J-hook arms. If your blades use a different connector, refer to the blade packaging for compatibility.
- Turn the ignition off and remove the key. Gently lift the driver’s wiper arm away from the windshield so it rests in a position where you can access the blade.
- Locate the release mechanism on the blade’s connector. On most 26" driver-side and 17" passenger-side blades, press the small release tab and slide the blade downward (toward the base of the arm) to detach it from the arm. If your blade uses a different connector, follow the manufacturer’s release method.
- Remove the old blade completely and inspect the arm for any damage or debris. Wipe the connection point with a microfiber cloth if needed.
- Prepare the new blade by removing any protective strips and ensuring it matches your arm’s connector type (J-hook or other).
- Attach the new blade to the arm by aligning it with the connector and sliding it into place until you hear or feel a secure click. Lower the wiper back onto the windshield and test its movement.
- Repeat the same process on the passenger side with the 17" blade. If your Civic uses a different size or arrangement, adjust accordingly and confirm a secure fit.
After installation, wipe away any fingerprints or residue from the windshield and run a quick test with the wipers to ensure smooth contact and proper clearance across the glass.
Rear wiper blade replacement (if applicable)
Some 2017 Civic hatchbacks and certain trims include a rear wiper. If your model has one, use these steps to replace it.
- Lift the rear wiper arm away from the rear window so it stays upright.
- Find the blade’s connector and release it by pressing the tab or rotating the blade as required by your rear blade design. Some models require a gentle twist to unlock.
- Slide the old blade out of the arm and discard it. Clean the arm’s contact area if needed.
- Attach the new rear blade by sliding it onto the arm until it locks in place. Ensure it sits securely and is aligned with the window surface.
- Lower the arm back onto the window and test the rear wiper to confirm proper operation.
Rear blade sizes vary by model and trim, commonly around 11"–13". Check the blade packaging or the owner’s manual for the exact measurement, and follow the specific installation instructions provided with the blade.
Summary
Replacing the wiper blades on a 2017 Honda Civic is a straightforward DIY task that improves visibility in rain and snow. Start with the front blades (26" driver side, 17" passenger side) and follow the proper release and locking steps to ensure a secure fit. If your model has a rear wiper, replace that blade separately using its specific connector and size. Always verify blade compatibility with your trim, install carefully, and test the wipe before driving in adverse weather.