The 2010 Ford Fusion SE uses a six-speed automatic transmission. The SE was offered with two engines—the 2.5-liter four-cylinder and the 3.0-liter V6—both paired with an automatic gearbox rather than a manual transmission.
Engine options and matching transmissions
The Fusion SE’s two available engines in 2010 were paired with the same general transmission setup, ensuring automatic gear changes throughout the drive.
- 2.5-liter Duratec I-4 — six-speed automatic transmission (no manual option).
- 3.0-liter Duratec V6 — six-speed automatic transmission (no manual option).
Both engine choices therefore share the standard six-speed automatic, with Ford’s conventional automatic shifting and no manual transmission offered for the SE trim that year.
Transmission features and maintenance considerations
The 2010 Fusion SE’s automatic transmission includes Ford’s typical driver-assist features, such as a manual shift mode (SelectShift) for manual upshifts or downshifts when desired. For maintenance, follow Ford’s recommended automatic transmission fluid (ATF) schedule and use the specified ATF type. Regular checks for fluid level and leaks can help prevent common transmission issues in older sedans.
Notes for buyers and owners
If you’re checking a specific vehicle, verify the exact engine and transmission by reviewing the VIN or the original window sticker, as regional or mid-year variations can occur. However, in the U.S. market for the 2010 Fusion SE, the standard setup was a six-speed automatic across the available engines.
Bottom line
The 2010 Ford Fusion SE does not offer a manual transmission; it uses a six-speed automatic transmission with either the 2.5-liter I-4 or the 3.0-liter V6 engine.
Summary
In short, the 2010 Fusion SE’s drivetrain relies on a six-speed automatic transmission for both engine options, providing automatic shifting and practical daily drivability for that model year.
What Ford Fusion has a CVT transmission?
All Fusion Hybrid and Fusion Energi models are powered by an Atkinson cycle naturally-aspirated 2.0L I4 gasoline engine with an electric motor, as well as a Continuously Variable Transmission (CVT). Gasoline-only Fusion models use a six-speed automatic transmission.
What does SE stand for in Ford SE?
Special Edition
As mentioned, SE can mean different things depending on the car company. However, the three most common uses of SE are Special Edition, Sport Edition, and Special Equipment. SE trims generally have more bells and whistles than the base or standard trim.
What year did the Ford Fusion have a bad transmission?
The recall affected 2013 – 2016 Fusions. In addition to the official recall, many Ford Fusion owners have reported serious transmission issues at relatively low mileage.
What type of transmission does a 2010 Ford Fusion have?
six-speed automatic transmission
(Other V-6 Fusions use a 3.0-liter.) The 3.5-liter mates to a six-speed automatic transmission with manumatic shifting, and it will hold gears in a decidedly sporty way.