To replace the wipers on a 2017 Hyundai Santa Fe, remove the old blades and snap on new ones of the correct size for your model, ensuring they click into place and are tested with the wipers. Front blades vary by trim and may use different adapters, while the rear blade uses a separate connector—always verify sizes and compatibility before buying.
For a 2017 Santa Fe, the front wipers typically use two different lengths (driver and passenger sides) and a standard adapter, while the rear wiper uses a shorter blade with its own connector. Sizes can vary by trim and region, so check the owner’s manual or blade packaging to confirm exact measurements.
What you’ll need
Before you start, gather the replacement blades and any basic tools you might need. You’ll replace both front blades and the rear blade, so have all three blades ready and verify that they match the Santa Fe’s adapter style (usually a J-hook for the fronts and a simple plug-in for the rear).
- Two front wiper blades in the correct sizes for your Santa Fe (driver and passenger sides)
- One rear wiper blade in the correct size
- Optional: cleaning cloths to wipe the blade contact areas
- Optional: gloves to protect your hands during removal
Having the right blades on hand helps you complete the job quickly and safely. When in doubt, consult your owner's manual or the blade packaging for exact lengths and adapter types.
Front wiper replacement: step-by-step
Use the following steps to replace both front wiper blades. The front blades on the Santa Fe typically use a hook-style adapter; the process is similar on most modern vehicles but may vary slightly by trim.
- Lift the wiper arm away from the windshield until it stays in a raised position.
- Identify the release mechanism on the blade adaptor. Press or lift the locking tab and slide the old blade downward or outward to disconnect it from the arm.
- Take the new blade and orient it to match the corresponding side (driver or passenger). Align the blade’s connector with the arm’s hook or adaptor.
- Slide the new blade onto the wiper arm until you hear or feel a click indicating it’s securely seated.
- Lower the wiper arm back onto the windshield slowly to avoid chipping the glass.
- Repeat the steps for the other front blade, then run a test sweep with water to confirm even contact and no streaking.
Concluding note: ensure both front blades are firmly attached and sit flush against the windshield. If either blade doesn’t lock in place, remove and reattach it, making sure you’ve aligned the connector correctly.
Choosing the right blades
Front blade compatibility depends on the adapter and length. Most 2017 Santa Fe models use a two-length front blade setup with a J-hook or similar connector. OEM blades typically guarantee fit and performance, but many aftermarket options work as well—just confirm the adapter type and length before purchasing.
Rear wiper replacement: step-by-step
The rear wiper on the Santa Fe is smaller and uses a separate connector. Follow these steps to replace it.
- Open the tailgate to access the rear wiper assembly.
- Lift the rear wiper arm away from the glass until it stays steady.
- Locate the release mechanism on the blade’s connector. Press the tab and slide the blade out of the arm’s connector.
- Take the new rear blade and align its connector with the arm’s receptacle. Slide it in until it clicks into place.
- Lower the rear wiper arm back onto the glass and run the wipers with a small amount of water to confirm proper operation.
Conclusion: the rear wiper tends to be a straightforward swap, but ensure the blade is fully seated in its connector and tested for full contact across the glass.
If your Santa Fe uses a non-standard or aftermarket blade, the attachment method might differ slightly (bayonet style, pin type, or other locking mechanisms). Always refer to the blade packaging for installation diagrams and follow safety precautions to avoid pinching or breaking the glass.
Summary
Replacing the wipers on a 2017 Hyundai Santa Fe is a straightforward DIY task. Start with the front blades, ensuring you have the correct lengths and adapters, reseat each blade securely, and test with water. Then replace the rear blade using the appropriate connector, again testing for proper operation. Verify blade compatibility with your specific trim, consult the owner’s manual or packaging if in doubt, and you’ll maintain clear visibility with every swipe.
What windshield wiper blades does a 2017 Hyundai Santa Fe use?
2017 Hyundai Santa Fe Wiper Blades Size/Price Chart
| Car | Driver | Pass. |
|---|---|---|
| 2017 Hyundai Santa Fe | 26 in. | 14 in. |
How to put windshield wipers up on Hyundai Santa Fe?
And then you're just trying to click that out so like we did last time. Pull down turn. And up so it comes off and then you can see I'm just trying to aim for this hole. Here.
What year to stay away from Hyundai Santa Fe?
The 2012 and 2013 models suffered from engine issues that led to high oil consumption and even engine failure in some instances. These problems often required costly repairs and put a dent in the reputation of these model years.
How to replace windshield wipers on 2017 Hyundai Santa Fe?
While pushing the lock pull down on the wiper. Blade then remove it from the arm. To place new blades on the arm. Fit the new blade on the arm. And pull it up into the fitting.