Yes. To replace the rear wiper blade on a 2019 Pacifica, lift the wiper arm, detach the old blade from the arm, fit a new 11-inch blade with the correct adapter, and test the wiper to ensure a clean sweep.
What you’ll need
Gather these items before you start so you can complete the job without delays.
- 11-inch rear wiper blade compatible with the 2019 Pacifica (OEM Mopar or aftermarket blade with the correct adapter)
- Adapter if your replacement blade requires one
- Microfiber cloth for cleaning and wiping the glass
- Plastic pry tool or the blade's release tool (optional, to help pop off a cap or adaptor)
Having the right blade and adapters on hand reduces the risk of improper fit and makes installation smoother.
Step-by-step replacement
Follow these steps to swap the rear blade safely and correctly.
- Lift the rear wiper arm away from the hatch glass until it is almost vertical and stays in place.
- If your blade has a protective end cap, remove it to expose the release mechanism on the blade adaptor.
- Detach the old blade from the wiper arm. If your blade has a snap-on adaptor, press the release tab and slide the blade off; if it attaches via a simple slot and hook, rotate the blade about 90 degrees and pull it away from the arm.
- Prepare the new blade. If required, attach the supplied adaptor to the blade according to the manufacturer's instructions.
- Attach the new blade to the wiper arm. Slide it onto the arm until it clicks or locks into place, making sure it is oriented the same way as the old blade.
- Gently lower the wiper arm back onto the glass, being careful not to slam it down.
- Test the wiper function to ensure a clean sweep and that there are no streaks or skips. If streaking occurs, check that the blade is seated correctly and replace if needed.
Ensuring the blade is properly seated will help prevent streaking and extend blade life.
Maintenance tips
Keep the rear blade in good condition with these simple practices.
- Inspect the blade every few months for cracks, tears, or heavy streaking; replace if any damage is present.
- Wipe the blade with a microfiber cloth and mild soapy water to remove dirt and debris.
- Avoid operating the wiper on a dry windshield, which can cause blade wear.
- Use a high-quality blade compatible with your Pacifica's rear wiper and climate conditions.
Regular inspection and proper storage of the blade can save you time and ensure visibility in poor weather.
Choosing the right blade
Blade size and compatibility
The 2019 Pacifica uses an 11-inch rear wiper blade. Check your owner's manual or the blade packaging to confirm the size and compatibility with the J-hook or other attachment style on your wiper arm.
Adapters and installation
Some blades come with adapters; ensure you use the correct one for a secure fit on the Pacifica’s wiper arm. If you're unsure, bring the old blade to the parts store to verify the adapter and fit.
Summary
Replacing the rear wiper blade on a 2019 Pacifica is a straightforward DIY task. With the proper blade size and a few minutes of careful work, you can restore clear visibility and maintain safe driving in wet weather.