To replace wiper blades on a 2018 Honda Accord, use the correct sizes—26-inch on the driver’s side and 18-inch on the passenger side—lift the wiper arms, detach the old blades from the wiper assemblies, install the new blades with a click, and lower the arms back onto the windshield, then test the wipes to confirm proper contact.
What you’ll need
Before you start, assemble the replacements and a few basic supplies to ensure a smooth swap.
- New wiper blades in the correct sizes: 26-inch driver blade and 18-inch passenger blade
- Optional adapters if your blade kit requires them
- Microfiber cloth for cleaning the blade and mounting area
- Gloves or hand protection (optional)
Having the right blades and a clean mounting area helps avoid streaks and ensure a secure fit.
How to replace the blades
Follow these steps in order to remove the old blades and attach the new ones to your Accord's wiper arms.
- Park the car, turn the engine off, and then lift the wiper arms away from the windshield so the blades are perpendicular to the glass and accessible.
- Carefully locate the blade’s connector on the wiper arm. Depress the release tab or catch on the blade’s connector and slide the blade out of the arm or hook.
- Remove the old blade from the arm entirely and set it aside.
- Prepare the new blade by removing any protective packaging and ensuring you have the correct adapter for your arm’s type (J-hook is common on Accords).
- Attach the new blade by sliding it into the wiper arm’s connector and until you hear/feel a click or lock. Make sure the blade is seated firmly and can’t be pulled out.
- Gently lower the wiper arm back onto the windshield and test the blades by turning on the wipers and, if possible, spraying water to check for even, streak-free coverage.
If the new blades don’t click into place, double-check the adapter and make sure you’re aligning the blade with the arm’s connector correctly.
Tips for a secure fit
Always check your owner’s manual or blade packaging for the exact connector type and size. Replace blades in pairs if one is worn to maintain even wiping performance, and wipe the blades clean periodically to extend their life.
Testing and disposal
After installation, perform a quick test: run the wipers at a low speed and spray water to verify there are no streaks or skip marks. If you notice streaks, reseat the blade or consider a higher-quality blade model. Dispose of the old blades according to local recycling guidelines or store them with your toolkit for future use.
Summary
Replacing the wiper blades on a 2018 Honda Accord is a straightforward maintenance task. Use the correct 26-inch driver and 18-inch passenger blades, detach the old blades by releasing the connector, attach the new blades until they click, reseat the arms on the glass, and test the wipe to ensure a clean sweep. Regular replacement every 12 months or when you notice streaks helps maintain visibility in rain and snow.