You can replace the windshield wipers on a 2009 Honda Accord yourself in about 5–15 minutes. The common blade sizes are roughly 24 inches on the driver’s side and 19 inches on the passenger side, but verify by checking the existing blades or the owner's manual.
Replacing worn blades is a straightforward maintenance task that improves visibility in rain and can prevent streaking. This guide explains what you’ll need, how to choose the right blades, and step-by-step instructions to swap them safely.
What you’ll need
Before you start, gather the supplies and confirm the correct blade sizes for your Accord.
- Two replacement windshield wiper blades (driver’s side blade around 24 inches and passenger-side blade around 19 inches for most 2009 Accords; verify with your current blades or owner’s manual).
- Optional: a microfiber cloth for cleaning the glass and blades.
- Replacement blades’ packaging or instruction sheet to confirm the attachment type.
- Optional: gloves or hand protection to avoid contact with sharp blade edges.
Having the correct blades and a clean windshield will help you complete the job quickly and ensure proper contact with the glass.
Step-by-step replacement
Follow these steps to remove the old blades and install the new ones. Take care to work slowly and avoid bending the wiper arms.
- Make sure the ignition is off and gently lift the wiper arm away from the windshield until it is almost vertical and the blade is accessible.
- Identify the blade’s attachment: on most 2009 Accords, the blade uses a J-hook or similar connector. Press the release tab and slide the blade off the arm.
- Remove the old blade from the arm. If your blade uses a pin connector, release the pin mechanism and pull the blade away.
- Take your new blade and attach it to the wiper arm: slide the blade onto the hook or align the pin, then listen for a click or feel a secure fit.
- Gently lower the wiper arm back onto the windshield. Avoid slamming it down to prevent glass damage.
- Test the blades: turn on the ignition, lightly spray water on the glass, and run the wipers to ensure smooth operation and no streaking.
With the blades securely attached and tested, you can wipe away moisture confidently and maintain clear visibility during rain.
Tips and maintenance
Regular checks and proper maintenance help extend blade life and performance, especially in challenging weather.
- Inspect blades for cracks, tearing, or hardened rubber. Replace if damaged or if streaking persists after cleaning.
- Consider winter or all-season blades if you live in a region with harsh winters or extreme heat.
- Replace blades in pairs to ensure even performance and avoid one worn blade affecting visibility.
Routine cleaning and timely replacement keep your windshield clear and your driving safer.
Common questions about the 2009 Honda Accord wiper blades
What size blades do I need for the 2009 Accord?
Most 2009 Accord models use approximately a 24-inch driver-side blade and a 19-inch passenger-side blade. Confirm by measuring the current blades or checking the owner’s manual or a trusted parts retailer’s fit guide.
What attachment types might I encounter?
Honda typically uses a hook-style connector (often called a J-hook) on older models, but some blades use a pin or side-lock mechanism. If you’re not sure, inspect the old blade’s connector and purchase a blade that matches that type.
Summary
Replacing the windshield wipers on a 2009 Honda Accord is a quick and straightforward DIY task that typically takes 5–15 minutes. Start by confirming the correct blade sizes (roughly 24 inches for the driver’s side and 19 inches for the passenger side), gather the blades, and follow the steps to remove the old blades and install the new ones. After installation, test the wipers with water to ensure a clean sweep and no streaks. Regular maintenance, including cleaning blades and replacing them when they show wear, helps maintain visibility and safety on the road.