To use the Honda City’s high beams, push the left-hand stalk away from you to lock them on and pull it toward you to flash; some trims have Auto High Beam that turns them on automatically when conditions allow. Use high beams on dark roads and switch to low beams when other traffic is present.
Controls and basic operation
Follow these steps to operate high beams on a Honda City. The action you take depends on whether you want a momentary flash or a sustained high-beam beam, and some markets offer Auto High Beam.
- With the ignition on, ensure your headlights are set to low beam or Auto mode.
- Locate the left-column stalk used for headlights and turn signals.
- To engage sustained high beams, push the stalk away from you (toward the front of the car). The high-beam indicator on the instrument cluster should illuminate.
- To flash high beams briefly, pull the stalk toward you (toward the driver) and release. The lights will return to low beam when released.
- If your model supports Auto High Beam, operate the stalk to the Auto position (often marked AUTO or A). The system will automatically switch between high and low beams based on ambient light and traffic.
- After using high beams, resume normal driving with low beams when appropriate to avoid blinding other road users.
These steps summarize typical operation for most Honda City variants and align with standard automotive practice.
Safety considerations and etiquette
High beams provide extra visibility on dark roads but can blind oncoming drivers or reflect off wet surfaces. Use them responsibly and switch to low beams when there is oncoming traffic, when following another vehicle closely, or in well-lit urban areas.
- Use high beams only on dark stretches with no oncoming traffic; dim to low beams as soon as you detect a vehicle ahead or approaching from the opposite direction.
- Avoid using high beams in rain, fog, snow, or heavy rain where glare reduces visibility for others.
- In cities and well-lit zones, default to low beams to reduce glare.
- If your Honda City has Auto High Beam, let the system manage beam switching, but be prepared to override if the system misreads conditions.
Following these practices helps maximize your own visibility while respecting other drivers and pedestrians.
Troubleshooting and maintenance
If high beams aren’t activating as expected, perform these quick checks before scheduling service.
- Confirm the headlight switch is turned to the low or Auto position and that the vehicle is in readiness to initiate high beams.
- Check the high-beam bulb and its fuse; a burnt-out bulb or blown fuse will prevent high beams from functioning.
- Inspect the headlight relays and wiring for corrosion or loose connections.
- If your City has Auto High Beam, ensure the camera or sensor area on the windshield and grille is clear of dirt or obstructions.
- Review the owner’s manual for model-specific instructions and any trim-specific features.
If issues persist, contact a Honda dealer or qualified technician for diagnosis and replacement of bulbs or wiring as needed.
Auto High Beam: availability by trim and market
What Auto High Beam does
Auto High Beam (AHB) automatically switches between high and low beams depending on lighting conditions and the presence of other vehicles. This feature reduces driver workload, but it may not be available on all City models or markets.
Where you’ll find it
AHB, when available, is typically controlled via the headlight/turn-signal stalk in the AUTO position or via a dedicated switch marked Auto. Availability varies by region, trim level, and model year.
Always consult your specific owner’s manual or dealership to confirm whether your Honda City includes AHB and how to enable or disable it.
Summary
In short, operating high beams on a Honda City involves using the left stalk to push for sustained high beams and pull for a momentary flash, with Auto High Beam available on select trims. Practice proper usage to maximize visibility while avoiding glare for other road users, and consult the manual for model-specific details.