Front wiper blades on a 2014 Jeep Cherokee are typically 22 inches on the driver’s side and 21 inches on the passenger’s side, while the rear blade is usually around 12 inches. Replace the blades by releasing the blade adapters from the wiper arms and snapping on new blades until they click into place. This is a quick maintenance task you can do in a few minutes with the right blades.
In this guide, we walk you through the step-by-step process for the front and rear wiper blades, including sizing guidance, how to release the old blades, and how to install the new ones. The Cherokee uses standard wiper-arm designs, but blade attachment styles can vary (universal adapters versus brand-specific fittings), so verify compatibility on the packaging or in your owner’s manual before you buy.
What you’ll need
Before you begin, gather these items to ensure a smooth swap:
- Replacement wiper blades: 22" (driver), 21" (passenger) for the front; about 12" for the rear (verify sizes on your trim if unsure).
- Proper adapters if your blades use a different mounting style (universal adapters are common).
- Small flathead screwdriver or a blade release tool (optional, only if your blades have a stubborn release clip).
- Clean cloth to wipe the wiper blades and arms.
- Water or windshield spray (optional) to test after installation.
With the right blades and tools on hand, you’ll be ready to replace both front blades and the rear blade efficiently.
Wiper replacement guide
Front wipers
Before you replace the front blades, make sure the vehicle is off and the wipers are in the parked position. Lift the wiper arms away from the windshield to gain access to the blades.
- Identify blade sizes: driver’s side blade is about 22 inches; passenger’s side blade is about 21 inches.
- Release the driver’s side blade: locate the release tab on the blade adaptor where it meets the wiper arm. Press the tab (or squeeze the sides of the adaptor) to unlock, then slide the blade off the arm in the direction away from the arm.
- Release the passenger’s side blade: repeat the release process for the other blade and remove it from its arm.
- Prepare the new driver’s side blade: remove any packaging and confirm you have the correct adapter for a J-hook or connector on your Cherokee’s arm.
- Attach the new driver’s blade: align the blade’s adaptor with the wiper arm and slide it onto the arm until you hear or feel a click indicating it’s secured. Gently tug to verify.
- Attach the new passenger’s blade: repeat the process for the passenger side blade, ensuring it’s firmly locked in place.
- Lower the wiper arms back onto the windshield and wipe a small section to confirm clearance and proper contact.
After installing, test by turning on the wipers and using the washer fluid to ensure smooth operation and proper contact with the glass.
Rear wiper
For the rear blade, lift the wiper arm away from the tailgate glass and locate the release mechanism on the blade adaptor. The rear blade typically uses a snap-on or slide-on connection that’s slightly different from the front.
- Measure and confirm rear blade length is about 12 inches (verify for your specific trim if unsure).
- Release the old blade: press the release tab on the blade adaptor or slide the blade away from the arm, depending on the design, to detach it from the wiper arm.
- Remove the old blade completely and clean the wiper arm tip if needed.
- Prepare the new rear blade with its adapter and orient it correctly for the tailgate’s curvature.
- Attach the new blade to the rear wiper arm by sliding or snapping it into place until it’s secure.
- Lower the wiper arm back onto the tailgate and test the rear wiper by cycling it once or twice.
Ensure the rear blade sits snugly against the glass and clears the full area when activated. If any resistance occurs during installation, double-check that the adapter is compatible with your wiper arm.
Tips and troubleshooting
Common issues and quick fixes:
- Blade sizing: always double-check the exact lengths listed on the packaging or in the owner’s manual, as trims or updates can vary by market.
- Adapting to different connectors: some blades come with multiple adapters; choose the one that fits your Cherokee’s arm type to avoid a loose fit.
- Stubborn clips: if a release tab is difficult to press, apply a little gentle pressure from the side with a non-marring tool and avoid prying against the glass.
- Test thoroughly: after installation, run the wipers at multiple speeds and spray water to confirm full coverage and no streaking.
Replacing worn wiper blades on a 2014 Jeep Cherokee is a routine maintenance task that helps ensure clear visibility in adverse weather. Keeping a spare blade set in the glove compartment can be handy for unexpected replacements.
Summary
To change wipers on a 2014 Jeep Cherokee, replace the front blades with driver’s side around 22 inches and passenger side around 21 inches, plus a rear blade about 12 inches. Lift the blades, release the adapters, swap in the new blades, and secure them with a click. Lower the arms and test with the wipers and washer fluid. Verify blade sizes if you’re unsure, and consult the owner’s manual or packaging for the exact adapters required. With the right blades and a few minutes, you’ll restore clear visibility quickly.
How to remove 2014 Jeep windshield wipers?
And 2016. The first thing we need to do is move the wiper blade to a more workable. Position. Now we can pinch this clip and remove the wiper. Blade.
How to replace wiper blades on a 2014 Jeep Grand Cherokee?
Rear wiper blade. Pull the arm nut cover ends outwards. And pull the cover away from the arm. Then lift the wiper arm away from the glass lift the arm assembly away from the glass.
Can I remove wiper arms without a special tool?
I often remove wiper arms using a wrench, when I haven't got any locking pliers around.
How to change windshield wipers for Jeep Cherokee?
And insert the bracket into the hook through the opening under the tab slide the wiper up into the hook. And then snap the tab into the locked. Position. Now just lower the wiper blade onto the glass.