The battery is located in the engine bay on the passenger side.
For most Dodge Journey models built between 2009 and 2019, the 12-volt battery sits in the engine compartment on the passenger side, typically near the strut tower and firewall. It is usually beneath a protective plastic cover that can be removed with basic hand tools.
Typical location in the engine bay
Use these checks to verify the battery’s position and identify its surroundings.
- Look toward the passenger side of the engine bay (the right side when you’re seated in the vehicle). The battery sits near the strut tower and firewall area.
- Identify a black rectangular battery housing or tray, which may be partially covered by a plastic shield.
- Remove any protective cover or shield to expose the terminals; the positive terminal is usually red-capped and marked with a +, the negative with a −.
- In some layouts, you may need to move aside a small coolant reservoir or other components to access the battery area.
Overall, the battery is in the engine bay on the passenger side, typically behind the right-front wheel well or near the strut tower, under a protective cover.
Maintenance and handling tips
If you’re preparing to work on the battery, follow these basic safety steps to reduce risk and ensure a solid connection.
- Park on level ground with the engine off, gear in Park (automatic) or Neutral (manual), and engage the parking brake.
- When disconnecting a battery, always remove the negative terminal first, then the positive; when reconnecting, connect the positive first, then the negative.
- Secure the battery with its hold-down clamp after installation and replace any protective covers or shields.
- Inspect battery terminals for corrosion and clean as needed using a baking soda solution and a wire brush; ensure terminals are dry before reconnecting.
These precautions help ensure safe handling and proper operation of the Dodge Journey’s electrical system.
Summary
The Dodge Journey’s 12-volt battery is placed in the engine compartment on the passenger side, under a protective cover for most model years. Knowing the general location helps with jump-starts, replacements, and routine maintenance.