Typical prices for a front strut assembly for a 2013 Hyundai Sonata range from about $60 to $180 per strut for aftermarket parts, with OEM or brand-name assemblies often in the $120 to $250 range. Labor and related costs can raise the total significantly if you hire a shop.
Understanding what you’re buying
Prices vary based on whether you need a front or rear strut, and whether you’re purchasing a plain damper or a full strut assembly that includes the coil spring, mounting hardware, and bushings. The Sonata uses a front MacPherson strut setup and a rear independent suspension, so both positions have different parts and price ranges.
Below are typical price ranges you can expect for the 2013 Sonata, depending on the type of strut and the retailer.
- Front strut assemblies (aftermarket, non-OEM): generally $60–$180 per strut.
- Front strut assemblies (OEM or branded like KYB/Monroe): typically $120–$250 per strut.
- Rear strut assemblies (aftermarket): usually $50–$150 per strut.
- Rear strut assemblies (OEM or branded): typically $100–$180 per strut.
Prices can vary by retailer, exact trim of the Sonata, and whether the part is a complete strut assembly or just a damper. Always verify compatibility for your exact vehicle configuration and confirm if the part includes the coil spring and mounting hardware.
Other costs to consider
Beyond the sticker price of the part itself, several additional costs can affect the total bill to replace one or more struts.
- Labor: Professional installation can add roughly 2–4 hours per axle, depending on the shop, location, and condition of mounting points.
- Alignment: A wheel alignment is often recommended after replacing struts, which can add about $75–$150 to the total.
- Parts and supplies: New mounting plates, boots, or hardware may be needed, adding a modest extra cost.
- Potential additional repairs: If mounts, bushings, or perches are damaged, the job may require extra parts and time.
Estimate a total project cost by combining the part price with labor and alignment fees. Replacing both front struts at once is common and may be more cost-effective than doing one side at a time, especially if you factor in a single alignment.
Where to buy and how to choose
Shop around at major auto parts retailers and online marketplaces to compare prices and availability for your exact 2013 Sonata configuration. When choosing a part, prioritize compatibility (front vs rear, correct spring rate, and mounting hardware) and the intended use (daily driving vs performance). If you’re unsure, consult a mechanic or refer to the vehicle’s service manual for part numbers and torque specifications.
Brand considerations
Brand-name options (e.g., KYB, Monroe) often balance price and performance, while OEM-equivalent parts may carry a higher upfront cost but align more closely with factory specs. Some cheaper aftermarket dampers can save money but may wear out faster or affect ride quality.
- Front strut assembly brands: KYB, Monroe, Gabriel, OEM-equivalentHyundai parts
- Rear strut assembly brands: similar aftermarket options with varying spring rates
Always verify the exact part number for your vehicle’s year and trim, and consider whether you want a full assembly (with coil spring) or a replacement damper only, as this markedly affects price and labor needs.
Summary
For a 2013 Hyundai Sonata, expect front strut assemblies to cost roughly $60–$250 per strut depending on aftermarket vs OEM branding, with rear struts typically in the $50–$180 range. Labor and alignment can add hundreds of dollars to the total, and prices vary by retailer, vehicle configuration, and whether you’re buying a full assembly or a damper only. Shop around, confirm compatibility, and plan for possible additional costs if other suspension components need replacement.
Notes
Prices reflected are general ranges based on typical market conditions as of 2024–2026 and can vary by region and retailer. Always confirm current pricing and compatibility before purchasing.