The standard front wiper blades for a 2020 Ford Ranger are typically a 26-inch driver-side blade and an 18-inch passenger-side blade. If your Ranger has a rear window wiper, that blade is usually 11 inches, though some trims or regional models may differ. Always verify with your owner's manual or Ford’s parts catalog using your VIN.
Wiper blade sizing can vary by market, trim level, and aftermarket replacements, so this guide focuses on the most common North American configuration for the 2020 Ranger and notes where variation may occur.
Front wiper blade sizes for the 2020 Ranger
Most 2020 Ranger front-wiper deployments use a two-blade setup. Here are the typical lengths you’ll encounter.
- Driver-side blade: 26 inches
- Passenger-side blade: 18 inches
These sizes cover the majority of Rangers on the road today. If your windshield has an unusual curve or you’ve swapped to aftermarket blades, sizes may vary slightly; always confirm with the packaging or a dealer if in doubt.
Rear wiper considerations
Not all 2020 Rangers equipped for the U.S. market include a rear wiper. For those that do, the common blade length is 11 inches, though some regional specifications might use a 12-inch blade.
- Rear wiper (if equipped): 11 inches
Because rear wipers are not universal across all Ranger trims and markets, it’s essential to confirm whether your specific model has one and, if so, the exact size from the manual or a parts catalog using your VIN.
How to confirm the right size for your vehicle
To ensure you buy the correct blades, follow these steps:
- Consult the owner's manual for the exact blade sizes recommended for your vehicle.
- Inspect the current blades for any size markings printed on the blade itself.
- Use Ford’s official parts lookup or contact a Ford dealer with your VIN to verify exact sizes.
- If needed, measure the blade length directly when installed to verify the correct length.
Tip: When replacing blades, consider aerodynamic or winter-rated options for improved performance in rain, snow, or cold weather.
Installation tips
Follow these practical steps to install new blades safely and correctly:
- Lift the wiper arm away from the glass and secure it with a soft cloth to prevent damage.
- Release the old blade from its hook or adapter and attach the new blade according to the manufacturer’s instructions.
- Return the wiper arm to the windshield and test the blades at low speed to ensure proper fit and coverage.
Conclusion: Matching the correct blade sizes ensures optimal visibility and performance. When in doubt, consult Ford parts or a certified technician to confirm the exact specifications for your vehicle.
Summary: In brief, the 2020 Ford Ranger typically uses 26-inch driver-side and 18-inch passenger-side front wiper blades, with an 11-inch rear blade if the model is equipped with a rear wiper. Always verify sizing for your specific VIN and trim to ensure a perfect fit.