Skip to Content
103 State St East Jordan, MI, 49727
  • MON: Closed
  • TUES: 8:00AM - 6:00PM
  • WED: 8:00AM - 6:00PM
  • THUR: 8:00AM - 6:00PM
  • FRI: 8:00AM - 6:00PM
  • SAT: Closed
  • SUN: Closed
MORE >
  • Yelp
  • Google Business Profile
  • Facebook
7984 North St Central Lake, MI, 49622
  • MON: 8:00AM - 6:00PM
  • TUES: 8:00AM - 6:00PM
  • WED: 8:00AM - 6:00PM
  • THUR: 8:00AM - 6:00PM
  • FRI: Closed
  • SAT: Closed
  • SUN: Closed
MORE >
  • Yelp
  • Google Business Profile
  • Facebook

How much is a serpentine belt for a Jeep Patriot?

A serpentine belt for a Jeep Patriot typically costs between $15 and $60 for the belt itself, with installed prices commonly ranging from about $150 to $300 depending on labor rates and whether tensioners or pulleys are replaced.


The Jeep Patriot, produced from 2007 to 2017, uses a single serpentine belt to drive accessories like the alternator, power steering pump, and air conditioning compressor. Prices vary by engine option (2.0L or 2.4L) and by where you buy—auto parts chain, dealership, or online. Installation costs can add significantly to the total if a tensioner, idler pulley, or other components require replacement.


Price ranges for the belt itself


The following ranges reflect typical belt prices across common brands and retailers as of 2026.



  • Budget aftermarket belts (no-name or economy brands): about $10–$25

  • Branded aftermarket belts (Gates, Dayco, Bando, Conti, etc.): about $25–$60

  • OEM/Mopar or dealer-sourced belts: about $50–$80 (some vehicles or parts departments may be higher)


In summary, the belt alone can be very affordable with budget options, while OEM or dealer belts tend to edge higher in price. Availability can vary by engine type and belt length, so it’s wise to confirm compatibility before purchasing.


Labor and installation considerations


Labor costs to replace a serpentine belt at a shop depend on location, but are typically in the range of $75–$150 for belt-only replacement. If the tensioner, idler pulley, or other components are worn and also need replacement, total labor can rise to roughly $150–$250 or more in some areas.


Shop estimates will usually break out belt price plus labor; a belt-only job is faster and cheaper, while additional parts increase both cost and time. The engine variant (2.0L vs 2.4L) can also influence belt length and fit, which affects both price and installation difficulty.


Where to buy and how to save


Choosing where to buy can impact price and turnaround time. Consider these common options.



  • Auto parts chains (AutoZone, O'Reilly Auto Parts, Advance Auto Parts)

  • Online retailers (Amazon, RockAuto, dealer websites)

  • Jeep dealership parts departments for OEM options


To save money, compare several sources, verify the exact belt length and number of ribs for your Patriot’s engine, and check whether the timing belt is due for replacement (note: the serpentine belt is separate from the timing belt). Some shops offer warranties on belts and labor, which can influence your choice.


Summary


For a Jeep Patriot, the belt itself is typically $15–$60, with installed costs often totaling around $150–$300 depending on labor rates and whether tensioners or pulleys are replaced. Budget belts are affordable but may wear sooner, while OEM/Mopar belts cost more but align with dealer standards. Shop around, verify compatibility, and consider whether ancillary parts like the tensioner or idler pulley need replacement to estimate the true total cost.

Ryan's Auto Care

Ryan's Auto Care - East Jordan 103 State St East Jordan, MI 49727 231-222-2199
Ryan's Auto Care - Central Lake 7984 North St Central Lake, MI 49622 231-544-9894

Ask any car or truck owner in Central Michigan who they recommend. Chances are they will tell you Ryan's Auto Care.