A PCV valve for a Honda Pilot typically costs between about $5 and $40 for the part, with aftermarket parts generally on the lower end and Honda OEM parts higher. Installed price, including labor, typically ranges from roughly $60 to $150 depending on the model year, engine, and local shop rates.
What a PCV valve does and why it matters
The positive crankcase ventilation (PCV) valve is a small, one-way valve that helps regulate crankcase pressure and emissions by routing blow-by gases back into the intake system. When it fails or becomes clogged, symptoms can include rough idle, increased oil consumption, poor acceleration, or a check engine light. Replacing a faulty PCV valve is a common and inexpensive maintenance item for the Honda Pilot's 3.5-liter V6 and related engines.
Pricing overview
Prices vary by source and generation. Here are typical ranges for the part alone. Labor costs, if you have a shop do the replacement, add to the total.
- Aftermarket PCV valve for a Honda Pilot: typically $5–$15
- Honda OEM PCV valve: typically $15–$40
- A dealer Parts price (parts only): typically $25–$60
- Online retailers/marketplaces (shipping may apply): typically $6–$25
Prices are indicative and can vary with promotions, stock, and the exact part number for your Pilot’s year and engine. Always verify compatibility with your vehicle before purchasing.
Where to buy
Where you purchase the PCV valve can affect price, warranty, and fit. Options include authorized Honda dealers, independent auto parts stores, and online retailers. OEM parts at the dealer typically cost more but carry factory-specific fitment; aftermarket parts are usually cheaper and widely available.
- Honda dealership parts department
- Large auto parts chains (e.g., AutoZone, Advance Auto Parts, O'Reilly)
- Online retailers (RockAuto, PartsGeek, Amazon, eBay) with filters for your Pilot's year and engine
- Manufacturer-specific aftermarket brands (e.g., Dorman, Genuine Honda) via official channels
Always confirm the exact part number for your Pilot’s year and engine, and check return policies and shipping times before buying.
DIY replacement: quick guide
If you plan to replace the PCV valve yourself, here is a simple guide to the process. The exact steps can vary by year, but the general approach is the same.
- Park the Honda Pilot on a level surface, engine off, and the hood raised. Locate the PCV valve on or near the valve cover with a hose leading to the intake.
- Loosen and detach the hose from the PCV valve using the appropriate tool or by hand, taking care not to damage the hose.
- Remove the old PCV valve from its port or grommet. Inspect the hose for cracks or wear; replace if needed.
- Install the new PCV valve into the port or grommet until it seats securely, then reattach the hose and secure the clamp if applicable.
- Reconnect any removed components, start the engine, and let it run to check for a smooth idle. If the check engine light remains on, a diagnostic scan may be needed.
Consider replacing any cracked hoses or worn fittings during the same service to avoid repeated work. If you’re unsure, a quick inspection by a mechanic can prevent missteps.
Summary
For a Honda Pilot, expect the PCV valve itself to cost roughly $5–$40 depending on aftermarket vs OEM and year. Installed cost typically falls around $60–$150, influenced by labor rates and whether additional intake or hose work is required. Shop around for the best price, verify the exact part number for your vehicle, and decide whether a DIY replacement or professional installation best fits your budget and skill level. Staying within these ranges should keep you within market norms for 2024–2026 pricing.