Replacing the wiper blades on a 2019 Kia Sportage is a quick, do‑it‑yourself task. The front blades are 26 inches on the driver’s side and 16 inches on the passenger side, with a rear blade of about 11 inches. With the right blades and a few minutes, you can complete the job safely.
What you’ll need
Before you start, gather the blades and a few basic supplies. For the 2019 Sportage, you’ll want two front blades (26" and 16"), one rear blade (about 11"), a microfiber cloth for the arms and glass, and a small tool or your fingers to release the blade adapters if needed.
- Front driver blade (26 inches)
- Front passenger blade (16 inches)
- Rear blade (about 11 inches)
- Microfiber cloth
- Replacement wiper blades from a reputable brand
Having the correct blades ready helps ensure a smooth swap and a streak-free wipe once you’re done.
Front wiper blades: removal and installation
Note: The 2019 Sportage uses a standard hook-style mount for the front wipers. The steps below cover both blades.
- Lift the driver‑side wiper arm away from the windshield until it stands up on its own.
- Locate the release mechanism on the blade’s connector (a tab or button). Press or slide the tab and pull the old blade straight away from the arm to remove it.
- Take the replacement blade and align its connector with the wiper arm’s hook. Slide it in until you hear a click or feel it lock securely in place.
- Repeat the same process for the front passenger blade (16 inches).
- Gently lower both wiper arms back against the windshield and test them in a safe area to confirm proper clearance and contact.
After the install, verify that each blade sits flush against the windshield along its entire length and that the arms return to park correctly when turned off.
Rear wiper blade: removal and installation
The rear wiper uses a separate connector and is swapped a bit differently. Follow these steps to replace the 11-inch rear blade.
- Open the rear hatch and carefully lift the rear wiper arm away from the rear window until it holds its position.
- Find the release mechanism on the rear blade adapter—press or slide the tab to release, then pull the blade out of the arm.
- Attach the new rear blade by aligning the connector with the arm’s slot and pushing until it clicks into place.
- Lower the wiper arm back onto the rear window and wipe a small area to confirm smooth operation.
- Test the rear wiper with the car on to ensure full contact and no interference with the glass.
When finished, ensure the rear blade sits firmly against the glass and that the wiper lowers back into its resting position correctly.
Blade sizes for the 2019 Kia Sportage
Here are the standard blade sizes used on most 2019 Sportage models. Regional variations can occur, so if in doubt, check the existing blades or your owner’s manual before purchasing.
- Front driver: 26 inches
- Front passenger: 16 inches
- Rear: 11 inches
With these sizes in mind, you can shop for a replacement set that fits all three positions, or purchase each blade individually from a reputable parts retailer.
Safety and testing tips
Always perform replacements with the vehicle parked, engine off, and the ignition in a safe position. After installation, test both front and rear wipers at low speed to ensure full contact across the entire blade length and to confirm there are no obstructions or misalignment.
Summary
Changing the wipers on a 2019 Kia Sportage is a straightforward maintenance task. Use front blades of 26 inches (driver) and 16 inches (passenger), plus an 11-inch rear blade. Follow the release and locking steps carefully, install the new blades with a click, and test them to ensure clear visibility in all weather. Regular replacement helps maintain optimal visibility and driving safety.
How to change windshield wipers on a 2019 Kia Sportage?
Them first turn off the engine. And lift the wiper switch to mist which is the uppermost. Position for 2 seconds. This will raise the wiper arms to the highest.
How to remove Kia brand windshield wipers?
Point be cautious not to scratch the windshield with the metal wiper arm. Now we're going to attach. The new wiper blade onto the arms hook or attachment.
How do I lift my Kia Sportage wipers?
And you'll see the wipers come up we'll go over that two more times for you right. Now.
How to put Kia Sportage wipers into service mode?
And then turn the ignition. Off. Then within 20 seconds of turning off the ignition push and hold the wiper lever in the m. Position for at least 3 seconds.