The bolt pattern on a 1998 Honda Accord is 5-lug on a 114.3 mm circle (5x114.3).
That means there are five wheel studs arranged on a circle with a diameter of 114.3 millimeters. While this pattern is standard for most US-spec 1998 Accords, you should also verify related fitment specs such as the center bore and lug thread size when selecting wheels or adapters.
Key specs to verify for wheels and adapters
When shopping for wheels or adapters, these core figures determine whether a wheel will fit your car without modification.
- Number of lug studs: 5
- Bolt circle diameter: 114.3 mm (4.5 inches)
- Center bore (hub bore): 64.1 mm
- Lug nut thread size: M12 x 1.5
- Note: If the hub bore differs, hub-centric rings may be required to ensure proper alignment and avoid vibration.
With these specs confirmed, you can determine wheel compatibility for a 1998 Accord and avoid fitment issues when purchasing aftermarket wheels or adapters.
Practical guidance for buyers
To verify fitment in practice, measure the wheel holes on your current wheels, confirm the center bore matches your hub, and check the thread size on your lug nuts. When in doubt, consult your vehicle’s manual, contact a dealership with your VIN, or ask a reputable wheel dealer to confirm that a specific wheel model is compatible with the 1998 Accord.
Notes on market differences
Regional variations
In most regions, the 1998 Honda Accord uses the same 5x114.3 bolt pattern, but there can be export or trim-specific variations. Always confirm with a reliable source for your exact vehicle, especially if your car is not a typical US-spec model. If you’re replacing wheels, bringing a sample of your current wheel to the shop can help verify compatibility.
Summary
Bottom line: The 1998 Honda Accord uses a 5x114.3 bolt pattern (five lugs on a 114.3 mm circle) with a 64.1 mm center bore and M12x1.5 lug threads. Use these specs to verify wheel compatibility, and consult a dealer or wheel professional if you’re ever unsure.