The rear wiper blade size for a 2018 Nissan Murano is 11 inches in length.
In practice, 11 inches is the standard rear-blade length for Murano models around that year, but variations can exist based on trim, aftermarket replacements, or owner modifications. To be sure, measure the existing blade or consult the owner's manual or a Nissan dealer's parts catalog before purchasing.
Verify size and purchase options
Before replacing, verify the correct size and identify compatible options so you buy the right blade the first time.
- Measure the current rear blade from tip to tip to confirm it is 11 inches, then compare with replacement listings labeled as “11 inch rear blade” for Nissan Murano.
- Check the owner's manual or the official Nissan parts catalog for the exact blade specification and any trim-specific notes.
- When shopping, verify the mounting style (J-hook, pin, or other attachment) to ensure compatibility with your wiper arm.
- Consider OEM Nissan blades for a guaranteed fit, or reputable aftermarket brands that list 11 inches as compatible with the Murano.
- Be mindful of climate and usage; some environments benefit from blades with better performance in cold or icy conditions.
Bottom line: 11 inches is the typical rear-blade size for the 2018 Murano, but always confirm to avoid buying the wrong part.
How to replace the rear wiper blade
Replacing the rear blade is a quick maintenance task. Here are the essential steps, followed by a brief note on post-install checks.
- Lift the wiper arm away from the rear window so the blade and arm are accessible.
- Locate the blade’s release mechanism (a small tab or clip) and press or slide to detach the old blade from the wiper arm.
- Remove the old blade completely and inspect the arm for damage or corrosion.
- Attach the new 11-inch blade by aligning it with the arm’s mounting point and ensuring it clicks or locks into place.
- Lower the wiper arm back onto the rear window and perform a test wipe to confirm proper seating and full contact with the glass.
If the blade doesn’t seat properly or skips during a test wipe, re-check the attachment or try a blade with the correct mounting style for your specific Murano model.
OEM vs aftermarket considerations
OEM blades guarantee factory-fitment, but many reputable aftermarket options in the 11-inch size offer comparable performance at a lower cost. When shopping, confirm compatibility with your Murano’s rear wiper arm attachment style and ensure it matches the blade length.
Where to buy
Retail options include Nissan dealerships, auto parts stores, and online retailers. When buying, verify the blade length (11 inches) and mounting style, and consider browsing customer reviews for performance in your climate.
- Authorized Nissan parts counters or the official Nissan parts website
- Major auto parts chains (Advance Auto Parts, AutoZone, O’Reilly) with 11-inch rear blades
- Online retailers and marketplaces that specify 11-inch rear blades for the 2018 Murano
Tip: If you’re unsure, bring the old blade or take a photo of the mounting to ensure you pick the correct replacement.
Summary
The 2018 Nissan Murano typically uses an 11-inch rear wiper blade. Confirm by measuring the current blade or consulting the owner’s manual or dealer parts catalog, then choose either OEM or a reputable 11-inch aftermarket blade. Replacing the blade is a quick, practical maintenance task that improves visibility in poor weather.