There isn’t a single universal part number for the 2019 Honda Civic splash shield. The Civic uses several splash shields across the underbody and wheel wells, and the exact number depends on whether you need the front or rear shield, the left or right side, and the specific trim or market. To confirm the exact part number, you’ll typically need the vehicle’s VIN and the precise shield location.
What counts as a splash shield on the 2019 Civic
The 2019 Civic employs multiple splash shields to protect the underbody and wheel wells. The main categories are the front under-engine (or under-cover) splash shield, the front fender liners for each side, and the rear splash shield. In most cases, the front components are split into left and right pieces, while the rear shield may also come in side-specific parts. Because part numbers vary by region, trim level (LX, EX, EX-L, Touring, etc.), and body style (sedan vs. hatch), there isn’t a single part number that applies to every 2019 Civic.
Front under-engine splash shield (under-cover)
This shield sits under the front of the engine bay to catch road spray and protect cooling components. Depending on the market and trim, it may be a single piece or split into left and right sections. Exact part numbers are determined by the diagram for your specific vehicle configuration.
Front fender liners (left and right)
The front wheel wells are protected by fender liners. Most Civic models require separate LH (left-hand) and RH (right-hand) liners, with part numbers differing by side and by trim/region. Always verify against the diagram that corresponds to your vehicle.
Rear splash shield
The rear area also has splash protection, which can be a dedicated shield for each side or a combined piece depending on the market. As with the front shields, the rear part numbers are specific to the vehicle’s VIN, trim, and region.
How to find the exact part number
To determine the precise part number for your 2019 Civic splash shield, you’ll need-to know the exact shield you’re replacing (front under-cover, front fender liner LH/RH, or rear shield), and your vehicle’s VIN. Use official catalogs and dealership resources to confirm the correct number for your build.
Before you start listing the exact parts, gather and review the following steps.
- Look up your vehicle in the Honda Parts Catalog or the dealer’s parts system using your VIN to pull the correct shield diagrams and part numbers.
- Identify the correct shield category (Front Under Cover / Fender Liner LH or RH / Rear Shield) and confirm the side (LH/RH) and whether the shield is a single piece or multiple pieces for your trim.
- Cross-check the diagram’s part numbers with what you see on the current shield or its packaging to ensure an exact fit for your trim and region.
- Contact a Honda dealer or an authorized OEM parts supplier with your VIN and the shield location to verify the exact part number and pricing.
- If considering aftermarket options, verify compatibility with your specific Civic generation (2019 model year, 10th gen) and body style.
In practice, the exact part number can vary by market (North America, Europe, etc.), trim level, and whether you’re replacing a front or rear shield. Having the VIN handy and referencing the official parts diagram is the most reliable approach.
Next steps and how I can help
If you share your vehicle’s VIN, the specific shield location (front under-cover, front LH/RH fender liner, or rear shield), and your market, I can help look up the exact Honda OEM part number and provide a direct match from official catalogs or trusted suppliers.
Summary
For a 2019 Honda Civic, there isn’t a single splash shield part number. The exact number depends on the shield’s location (front under-cover, front fender liner LH/RH, or rear shield), the side, trim level, and regional market. To get the correct part number, consult the Honda Parts Catalog with the VIN, verify the shield diagram, and confirm with a dealer or OEM parts supplier. Providing the VIN and shield location will allow for precise identification.