The Rogue’s RE0F10A CVT typically requires about 9.5 quarts (roughly 9 liters) of Nissan CVT Fluid NS-2 for a complete change, with the total system capacity generally in the 9–10 quart range depending on the service method used.
Fluid type and capacity
Understanding the right fluid and how much to add helps ensure proper transmission operation and longevity. Nissan specifies CVT Fluid NS-2 for many older CVTs, including the Rogue’s RE0F10A unit. The following points summarize what you should know before a change.
- The standard, full-change capacity is approximately 9.0–9.7 quarts (about 8.5–9.2 liters).
- Recommended fluid: Nissan CVT Fluid NS-2. Do not substitute with conventional ATF unless explicitly approved by Nissan for your VIN.
- Service method matters: a full drain/pan removal and filter replacement will approach the above capacity, while a simple drain-and-fill may use less and require top-offs to reach the correct level.
When planning a CVT fluid service, it’s wise to consult the vehicle’s service manual or a Nissan dealership to confirm the exact quantity for your specific VIN, as variations can occur by production date or regional specifications.
Service notes and considerations
To help ensure the best results and avoid potential transmission issues, keep these guidelines in mind during maintenance.
- Verify the fluid specification for your VIN and regional market; NS-2 is the common specification, but always confirm with official documentation.
- Avoid mixing CVT fluids with other types of transmission fluid; use only the recommended NS-2 fluid.
- Follow a drain-and-fill approach recommended by Nissan or your technician; some shops perform a full featured change, while others only drain the pan and refill. Plan for near the total capacity if you’re doing a full change.
For best results, have the service performed by a qualified technician who can verify fluid level after warming up the transmission and ensure proper tool usage and torque specs.
Summary
For a 2010 Nissan Rogue with the RE0F10A CVT, plan around 9 to 9.7 quarts of Nissan CVT Fluid NS-2 for a full change, with the total system capacity in that same range. Always confirm fluid type and exact quantity with the owner's manual or a Nissan service representative for your VIN.