The typical front wiper blades for most Honda Fit models are 24 inches on the driver’s side and 16 inches on the passenger’s side. Some markets or trims may vary, so it’s best to verify for your exact year and model.
The Honda Fit has been sold across multiple generations since 2007, with variations in markets and trims sometimes affecting blade lengths. This guide outlines the common sizes and how to confirm the right fit for your vehicle.
Front wiper blade sizes by generation
Before listing the sizes, note that the following are the most commonly replaced lengths reported for Honda Fit models in many markets. Always confirm with your owner’s manual or a parts lookup if you’re outside those markets or have a unique trim.
- 2007–2008 Honda Fit (first generation, GK1): Driver 24 inches; Passenger 16 inches
- 2009–2013 Honda Fit (second generation, GK2): Driver 24 inches; Passenger 16 inches
- 2014–2020 Honda Fit (third generation, GK5): Driver 24 inches; Passenger 16 inches
In most cases, these sizes apply across generations, but regional variations can occur. If you’re unsure, consult your owner’s manual or a trusted parts retailer for the exact lengths for your year and market.
How to verify the exact size for your vehicle
Use these steps to confirm the correct blade lengths and connector type for your specific Fit:
- Check your owner’s manual or the packaging on your current blades for the listed lengths.
- Measure the blades you replace by extending them fully and measuring from tip to tip.
- Use an online parts retailer or Honda’s official parts finder by entering your year, trim, and market to confirm the recommended sizes.
- If in doubt, visit or call a local auto parts store with your VIN or exact model details; they can pull the correct sizes for you.
Correct blade sizing ensures proper fit, full windshield coverage, and prevents streaking during rain or snow.
Rear wiper blade size (if applicable)
Some Honda Fit models equipped with a rear wiper use a smaller blade. Typical rear blade lengths range around 11 to 12 inches, depending on year and market. Verify using the same methods described above for your rear blade.
Notes on blade types and connectors
Blades come with different connector types (hook, J-hook, or pin adapters) and blade styles (framed vs. beam). Even with the same length, you may need a specific connector to fit your wiper arm. When purchasing, use a parts lookup to confirm both blade length and connector compatibility.
Summary: For most Honda Fit models, you’ll typically need 24-inch driver-side blades and 16-inch passenger-side blades. Regional and market variations can occur, so always verify your exact year, trim, and market before purchasing.
In summary, if you’re replacing front wipers on a Honda Fit, start with 24" driver and 16" passenger blades, and confirm exact sizes through your owner’s manual or a reputable parts retailer to ensure a proper fit and clear visibility.