Typical professional replacement costs for Jeep Cherokee motor mounts fall in the 350 to 900 range, depending on engine type, how many mounts are involved, and local labor rates. If you DIY and only buy parts, you might spend roughly 60 to 300 for one or more mounts.
In this article, we break down the factors that influence price, typical ranges for common Cherokee configurations, and practical tips for getting accurate quotes from shops or deciding whether a do-it-yourself approach makes sense. Because Cherokees span multiple years and engines, exact prices can vary based on trim and engine layout.
What affects the cost of motor-mount replacement on a Cherokee
Several factors determine how much you will pay for a motor-mount replacement. The following points outline the main cost drivers.
Number of mounts
Most Cherokee setups use at least two engine mounts and a transmission or torque mount. Replacing more mounts increases both parts cost and labor time.
- Two mounts: generally the lowest baseline price for this job.
- Three mounts or more: higher total cost due to extra parts and additional labor.
When planning, expect a step-up in price if the job requires replacing multiple mounts rather than a single mount.
Engine and model year
Different engine options (for example, four-cylinder versus V6 configurations) can change the number and type of mounts, as well as the complexity of removal and reinstallation. Model-year tweaks may affect torque specs and mounting hardware availability.
- Some engines have mounts that are harder to access, increasing labor time.
- Specialist tools or procedures may be required for certain configurations.
These variations can push price up or down by a notable margin depending on the exact Cherokee you own.
Parts quality and sourcing
OEM (dealer) parts typically cost more than aftermarket equivalents, but some buyers prefer OEM for guaranteed fit and durability. Aftermarket mounts vary in price and longevity.
- OEM parts: higher upfront cost, potentially longer warranty coverage.
- Aftermarket parts: lower upfront cost, variable longevity and warranties.
The choice between OEM and aftermarket is a key factor in the total price and may affect future reliability and vibrations.
Typical price ranges
Below is a practical breakdown of what you might expect to pay on average, with notes on what drives the numbers.
- Parts cost per mount: typically $20–$120, depending on whether you’re buying a front engine mount, rear engine mount, or a transmission mount, and whether OEM or aftermarket.
- Labor time: usually 1–3 hours per mount for straightforward replacements; 2–6 hours per mount in tougher access scenarios. For two mounts, total labor often falls in the 2–6 hour range; for three mounts, 4–12 hours is common.
- Shop labor rate: $75–$150 per hour in many regions; dealership rates can be higher, especially in metropolitan areas.
With these variables, most professional replacements fall roughly in the $350–$900 range. In high-cost areas, or when a dealer performs the work and multiple mounts are involved, prices can approach or exceed $1,000 to $1,200.
DIY vs. professional replacement
Choosing to do the work yourself can dramatically cut parts costs but increases risk if you lack the right tools or experience.
- DIY parts-only cost: roughly $60–$300 total, depending on number of mounts and brand.
- Tools and equipment: you’ll need a jack, jack stands, a socket set, possibly a torque wrench, and rotating accessories if engine movement is required.
- Risks: improper installation can lead to vibrations, misalignment, or engine stress; some Cherokee configurations may require careful engine positioning or alignment after install.
For many owners, DIY is viable only if you’re comfortable with mechanical work and have a safe space to work. Otherwise, a professional installation avoids potential missteps and often comes with a labor warranty.
How to get an accurate quote
To ensure you receive realistic estimates, prepare details about your vehicle and request a clear breakdown of costs.
- Provide year, trim, engine type, and the number of mounts to be replaced.
- Ask for a line-item breakdown: parts (per mount) and labor hours at the shop’s hourly rate, plus any disposal or shop supplies fees.
- Request warranty terms on both parts and labor, and ask if they’ll cover complications like bent brackets or exhaust clearance if encountered during the job.
Compare multiple quotes and check reviews or references to gauge service quality. A lower total price may not always be the best value if it lacks a solid warranty or reputable workmanship.
Summary
Replacing motor mounts on a Jeep Cherokee typically costs about $350 to $900 at a shop, with higher prices in areas with steep labor rates or dealership work. Parts costs can be lower if you replace fewer mounts or opt for aftermarket components, and DIY can cut costs further but carries safety and mechanical risks. To get the best value, obtain several written quotes with clear part and labor breakdowns, consider the warranty, and factor in your comfort level with a DIY approach.