The rear wiper blade for a 2020 Honda CR-V is 12 inches long (about 30 cm). This article explains the size, how to verify it on your vehicle, and tips for replacement and maintenance.
On most US-spec and many international 2020 CR-V models, the rear window uses a single 12-inch blade mounted vertically along the rear hatch. The exact size is usually printed on the blade itself or listed in the owner's manual; if in doubt, verify with your VIN or an online parts catalog to ensure a proper fit.
Confirming the correct size for your vehicle
Use the following steps to verify the blade size before buying replacements.
- Check the owner's manual or the label on the current blade for the size (some blades have the length printed on the packaging or blade).
- Measure the blade length from tip to tip after removing it from the arm; for the CR-V, the standard rear blade is typically 12 inches.
- Consult the official Honda parts catalog or a reputable parts retailer by entering your year, model, and trim to confirm compatibility.
Verifying the size helps ensure a proper seal on the glass and optimal wipe quality, especially in areas with harsh weather.
Recommended replacement options (12" rear blades)
Many major brands offer 12-inch rear wiper blades that fit the 2020 CR-V. The exact model name may vary by retailer, but look for 12" rear blades listed as compatible with Honda CR-V rear applications. Always verify compatibility with your VIN when possible.
- Bosch 12" rear wiper blade (common 12" size suitable for Honda CR-V rear window)
- Valeo 12" rear wiper blade (beam or hybrid style)
- Rain-X 12" rear wiper blade (check model for rear-fit on CR-V)
- Other reputable brands offering 12" rear blades compatible with Honda CR-V
When choosing an aftermarket blade, ensure the connector type matches your wiper arm and consider a beam-style design for improved contact and reliability in rain or snow.
How to replace the rear wiper blade
Replacing the rear wiper blade on the CR-V is a quick, tool-free process. Follow these steps for a secure fit and optimal visibility.
- Raise the wiper arm away from the rear window and hold it steady so it doesn’t snap back.
- Release the old blade by pressing the release tab or disengaging the locking mechanism specific to your blade type.
- Slide the old blade out of the connector or detach the retaining clip according to the blade’s design.
- Attach the new blade by sliding it into the connector until you hear a click or until it’s firmly secured.
- Carefully lower the wiper arm back onto the window and test the wipe motion to ensure full contact and no skipping.
Avoid using excessive force to prevent damaging the window or bending the wiper arm.
Compatibility notes and regional variations
While 12 inches is the standard size for most US-spec 2020 CR-Vs, regional differences can occur. Some markets may use a different rear blade length due to variations in wiper arm design or window shape. Always verify with your local dealer, owner's manual, or a parts catalog tailored to your region.
Regional variations
In North America, a 12" rear blade is typically correct for the 2020 CR-V. In other regions, you may encounter 11" or 12" options depending on the specific model year or trim; when in doubt, confirm with official documentation or a VIN-validated parts lookup.
Summary
The rear wiper blade size for the 2020 Honda CR-V is commonly 12 inches in length. Verify the size on the existing blade or in the owner's manual, and choose a reputable 12" replacement to ensure proper fit and performance. Regular checks and timely replacement help maintain clear rear visibility in all weather conditions.