The TPMS reset on a 2017 Honda Accord is accomplished by inflating all four tires to the recommended cold pressures, calibrating the system through the vehicle’s settings, and then driving to complete the relearn process.
What you need to know before you start
Before you begin, verify the recommended cold tire pressures for your specific model. This information is printed on the driver’s door jamb sticker and in the owner’s manual. Do not include the spare tire in the TPMS calibration, and make sure tires are cold (not recently driven) for an accurate reading.
Steps to reset TPMS
Follow these steps to reset the TPMS on a 2017 Accord. The steps assume your model uses the MID touch-screen or steering wheel menu for TPMS calibration.
- Check and adjust all four tires to the recommended cold pressures. The exact PSI is on the door jamb sticker or in the owner’s manual. Do not include the spare in the calibration.
- Turn the ignition to ON with the engine OFF (or to ACC depending on your model) and access the TPMS calibration option from the instrument cluster or multimedia display. Use the steering wheel controls to navigate to Vehicle Settings > TPMS Calibration (or Tire Pressure Monitor Calibration).
- Select Calibrate or Reset, then confirm to begin the calibration process.
- Drive at a steady speed—about 50 mph (80 km/h) or higher—for at least 10 minutes to allow the system to relearn the new tire pressures.
- After the drive, check the dashboard. The TPMS warning light should turn off. If it remains on, recheck pressures and consider a sensor issue that may require professional inspection.
Note: If your Accord trim includes a dedicated TPMS button, you may be able to initiate calibration by pressing and holding that button until a confirmation signal appears, followed by the highway-speed drive.
Concluding advice: If you recently replaced tires or had a tire rotation, recalibration is especially important to ensure accurate monitoring and safe handling.
Alternative methods and tips
Some models or trims may show slight variation in the menu path. If you don’t see a dedicated TPMS Calibration option, check the Vehicle Settings menu for similar labels like “Tire Pressure Monitor” or “TPMS Learn.”
Tip: Always ensure tires are cool when measuring pressures and recheck after a short drive if the readings change significantly.
What to do if the light won’t go off
If the TPMS warning light stays on after calibration and a sufficient highway drive, there may be a sensor issue, a damaged valve, or a leak in one tire. In that case, have the tires inspected by a qualified technician or a Honda dealership to diagnose potential sensor or hardware problems.
Summary
Resetting the tire pressure monitoring system on a 2017 Honda Accord involves inflating all four tires to the recommended cold pressures, calibrating the TPMS via the vehicle’s settings panel, and driving at roughly highway speeds for about 10 minutes to complete the relearn. If the warning light persists, recheck pressures and seek professional help for sensor or valve issues.