For a 2017 Chevy Malibu, brake replacement typically costs about $300–$800 per axle, depending on whether you replace pads only or include rotors and on local labor rates.
What affects the price
Several factors shape the final brake replacement bill. The parts you choose (pads, rotors, calipers, sensors), whether rotors are replaced or resurfaced, the shop’s labor rate, and your location all influence the total. Here are the main drivers.
- Parts quality and type (OEM vs. aftermarket, ceramic vs. semi-metallic pads).
- Whether rotors are replaced or resurfaced (rotors in good condition may be resurfaced at lower cost).
- Labor rates, which vary by region, shop type (independent shop vs. dealer), and urgency of the job.
- Number of axles involved (front only, rear only, or both axles).
- Additional services such as a brake fluid flush, rotor resurfacing, or sensor replacements.
- Vehicle-specific issues (sticking calipers, rust, or damaged pins) that can add labor time.
Prices can vary widely by location and shop, but understanding these factors helps you compare quotes more accurately.
Typical price ranges by scenario
Below are common brake-replacement scenarios and their typical price ranges in the United States. Prices are given per axle unless noted and can be affected by regional labor rates.
Pads only (per axle)
Costs shown are for replacing only the brake pads on a single axle, with labor and standard hardware included. Ceramic pads may push the price higher.
- $150–$300
Concluding note: This is the lowest-cost option when rotors and calipers are still within specification.
Pads and rotors (per axle)
Costs include both new pads and new rotors on a single axle, typically chosen when rotors show wear or scoring. Ceramic pads add to material costs.
- $300–$550
Concluding note: Expect higher pricing if calipers require replacement or if rotor resurfacing is not an option.
Both axles (pads and rotors on front and rear)
This represents a full replacement across both ends of the vehicle, a common approach when both axles show wear.
- $600–$1,100
Concluding note: The total will be at the upper end if you opt for premium pads or dealer-supplied parts, or if additional services are needed.
Ways to save money and get a fair estimate
To minimize surprises and ensure you’re getting a fair deal, consider these steps when budgeting for brake work.
- Get written quotes from multiple shops with itemized parts and labor.
- Ask whether rotors are included or if resurfacing is an option in each quote.
- Compare aftermarket vs. OEM parts and check warranties on both parts and labor.
- Clarify whether caliper replacement or brake fluid flush is included or optional.
- Inquire about brake pad material (ceramic vs. semi-metallic) and how that affects pricing and longevity.
Concluding note: A detailed, written estimate helps you compare apples-to-apples and avoid sticker shock.
What to expect during the service
Knowing the typical steps can help you understand the bill and the time required for the job.
- Initial inspection of pad thickness, rotor condition, and caliper operation.
- Wheel removal, component inspection, and measurement against manufacturer specifications.
- Replacement of pads, rotors (if applicable), and any necessary caliper or hardware components.
- Lubrication of moving parts, reassembly, and a road test to verify proper operation.
Concluding note: A transparent shop will review wear measurements and explain any extra labor or parts needed before proceeding.
Summary
Brake replacement costs for the 2017 Chevy Malibu vary based on which parts are replaced, the choice of parts, and local labor rates. In general, expect roughly $300–$800 per axle for standard jobs, with $600–$1,600 for replacing brakes on both axles (especially when rotors are replaced on both ends). Getting multiple, itemized quotes and clarifying whether rotors, calipers, or fluids are included will help you secure a fair price. By understanding the main cost drivers and typical scenarios, Malibu owners can budget more accurately and avoid unexpected charges.
How much are brakes for a 2017 Chevy Malibu?
The average price for a 2017 Chevrolet Malibu Brake Pads and Shoe at Advance Auto Parts is around $62.20, with a range that starts at $42.99 and goes up to $110.10. With 19 options in stock from 6 trusted brands, finding the right fit is easy.
Is a $99 brake special a good deal?
A $99 brake job sounds great… until you realize it's pads in a box, no hardware, no rotors, no workmanship, and definitely no warranty. Cheap brake deals often leave you paying much more in the end — in parts, in labour, and in headaches. Do it right the first time.
How much is a brake job on a Chevy Malibu?
The average cost for a Chevrolet Malibu Brake Pad Replacement is between $324 and $384. Labor costs are estimated between $128 and $188 while parts are typically priced around $196. This range does not include taxes and fees, and does not factor in your unique location. Related repairs may also be needed.
What is the most common problem on a 2017 Chevy Malibu?
Owner Reported Trouble Spots
- Noises/Leaks. Squeaks, rattles, wind noises, seals and/or weather stripping, air and water leaks.
- Electrical Accessories.
- Brakes.
- Fuel System/Emissions.
- Transmission Minor.
- In-car Electronics.
- Drive System.
- Exhaust.