The 2016 Nissan Rogue has two air filters: the engine air filter in the engine compartment and the cabin air filter behind the glove box in the passenger area.
The following sections explain where to find each filter, how to access it, and tips for replacement.
Engine air filter location
The engine air filter sits inside a rectangular plastic housing in the engine bay, typically on the passenger side near the outside edge of the firewall. It’s held in place with clips or screws, which you remove to lift the cover and swap in a new filter of the correct size and orientation.
Before you begin, make sure the engine is cool and gather the necessary tools. Replacement intervals commonly fall around 30,000–45,000 miles, but always check the owner's manual for the exact specification.
- Park the Rogue on a flat surface and open the hood. Locate the engine air filter housing on the passenger side of the engine bay.
- Release the clips or screws securing the housing cover and lift it off.
- Remove the old filter, check the housing for debris, and wipe it clean if needed. Insert the new filter with the correct airflow direction (usually indicated on the filter).
- Reattach the housing cover and secure the clips or screws. Start the engine and ensure there are no abnormal noises or leaks.
Replacing the engine air filter helps maintain proper air intake, performance, and fuel efficiency. If you notice reduced acceleration or poor engine performance, inspect or replace the filter.
Cabin air filter location
The cabin air filter for a 2016 Rogue is located behind the glove box on the passenger side. Access typically requires lowering or removing the glove box or its stops, then opening a small panel to reach the filter housing. Install the new filter with the correct airflow direction and reassemble.
Ensure the vehicle is parked and the engine is off before starting. Cabin filters are often recommended every 15,000 miles or per the owner’s manual, with more frequent changes in dusty or urban environments.
- Open the glove box and release the stops or damper to allow it to drop down.
- Locate the cabin filter access panel behind the glove box and remove it.
- Take out the old filter and clean any debris from the housing. Insert the new filter with the arrows pointing in the correct airflow direction.
- Reattach the access panel and restore the glove box to its normal position. Test the HVAC system to confirm proper airflow.
Replacing the cabin air filter improves interior air quality and HVAC efficiency. If you notice musty odors or reduced airflow, check the cabin filter first.
Summary
For a 2016 Nissan Rogue, you’ll typically replace two filters: the engine air filter in the engine compartment and the cabin air filter behind the glove box. The engine filter is accessed by removing the housing cover with clips or screws in the engine bay, while the cabin filter is accessed by lowering the glove box and removing a small access panel. Regular replacement—per the owner's manual or driving conditions—helps maintain engine performance and interior air quality.