In brief: expect roughly $260-$600 per front wheel and $180-$380 per rear axle for a wheel bearing replacement on a Nissan Versa; replacing both front hubs commonly costs about $520-$1,200. Prices vary by region, part type (hub assembly vs. bearing), and whether alignment or additional services are needed.
Wheel bearings wear over time and can fail due to moisture, debris, or mileage. The Versa typically uses hub assemblies for the front (and sometimes rear), which may include the ABS sensor. Costs depend on whether you install a full hub assembly or a separate bearing, the quality of parts (OEM vs. aftermarket), labor rates, and any related services like rotor work or alignment. These estimates reflect typical ranges as of 2024-2026 and can vary by model year, trim, and location.
What affects the price
Several factors influence the final bill for a Versa wheel bearing replacement. Prices vary by location, shop, and whether you replace a single wheel or both, and whether the part is a hub assembly or individual bearings. The following list highlights common cost drivers:
- Which wheel is being replaced (front hubs are usually more expensive than rear bearings).
- Type of part (hub assembly vs. separate bearing; OEM vs. aftermarket).
- Labor rates and shop location (urban areas and dealer shops are typically more expensive).
- Whether ABS sensor and wiring are integrated into the hub and require replacement.
- Need for additional services (rotor resurfacing or replacement, axle inspection, steering knuckle replacement, wheel alignment).
Concluding: In practice, front-wheel hub replacements tend to cost more than rear bearings, and the final price depends heavily on your locale and the specific parts used.
Typical cost ranges
Prices below reflect common ranges reported by automotive repair shops for Versa models and consider parts quality and labor. These are ballpark figures and can vary by year, trim, and region. As of 2024-2026, use these as a baseline when requesting quotes:
- Front wheel hub assembly (single wheel): Parts roughly $60-$350; labor about $100-$250; total typically $260-$600 per wheel. OEM hubs may be toward the higher end.
- Rear wheel bearing replacement (single axle): Parts roughly $60-$150 (bearing or hub); labor about $100-$230; total typically $180-$380 per axle. Some rear setups require more labor if a knuckle or press work is needed.
- Both front wheels replaced at once: Expect roughly double the per-wheel cost, commonly $520-$1,200 in total depending on parts quality and labor.
- Additional services (alignment, rotor work, or ABS sensor concerns): Add $50-$150 for alignment and $20-$80 per rotor or $100-$250 for rotor replacement if needed.
Conclusion: For a typical Versa, plan about $300-$600 per front wheel and $180-$380 per rear axle, with a full front-end pair around $600-$1,200. Always obtain a written estimate that clearly lists parts (hub vs. bearing kit), labor hours, and any required alignments or sensor replacements.
What to expect during the repair
The repair generally involves removing the wheel and brake components, then removing the old hub/bearing assembly from the steering knuckle. If a hub assembly is used, the new unit includes the bearing and often the ABS sensor. Some jobs may require pressing out a worn bearing and pressing in a new one, or installing a complete hub assembly. After installation, the brakes are checked and the vehicle may require an alignment to ensure proper handling and tire wear.
Notes for consumers
Shop quotes can vary, and dealerships typically charge more than independent shops. If your Versa is under warranty or you have a service plan, verify coverage. Request a breakdown of parts (OEM vs. aftermarket) and labor hours. Consider obtaining quotes from multiple shops to ensure competitive pricing and warranty terms.
Summary
Replacing a wheel bearing on a Nissan Versa typically costs about $260-$600 per front wheel and $180-$380 per rear axle, depending on whether a hub assembly or individual bearing is used, part quality, and local labor rates. Replacing both front hubs often runs roughly $520-$1,200. Include potential alignment and related services in your budget, and seek multiple quotes for the best overall value.