The tire pressure light on a Honda Civic is usually reset by inflating all tires to the recommended pressure and then using a TPMS button or the car’s calibration menu. In many cases, the system relearns automatically after a short drive.
Resetting procedures can vary by year and trim. Some Civics include a dedicated TPMS button under the left dash, while others rely on the infotainment or instrument cluster to perform a reset. If you’ve recently rotated, repaired, or replaced tires or sensors, a recalibration is typically required.
What you need to know about TPMS on the Civic
TPMS, or tire pressure monitoring, lights indicate underinflated tires or a sensor issue. Before attempting a reset, verify all tires are inflated to the recommended PSI, which is listed on the door jamb sticker and in the owner's manual. A proper reset should reflect accurate readings once the tires are at the right pressure.
Reset options by method
Choose the method that matches your Civic’s configuration. Here are common procedures used across recent models.
Using a TPMS reset button (where fitted)
If your Civic has a dedicated TPMS button, follow these steps to reset the system.
- Inflate all tires to the recommended cold tire pressures.
- Turn the ignition to ON (engine off) or to the position specified in your manual.
- Press and hold the TPMS button until the TPMS indicator light flashes or goes out.
- Drive the car at moderate speeds (usually 30–50 mph) for several minutes to let the system relearn the new pressures.
After completing these steps, monitor the dashboard light. If it remains off after a short drive, the reset is successful.
Using the Settings/Calibration menu (no dedicated button)
Some Civics reset via the vehicle’s settings or infotainment system. Use this method if you don’t have a TPMS button.
- Inflate all tires to the recommended cold pressures.
- With the ignition ON, access the vehicle’s settings menu on the instrument cluster or touchscreen.
- Navigate to TPMS Calibration or TPMS Reset, then select Reset/Calibrate.
- Drive at a steady speed (typically 30–50 mph) for about 10 minutes to allow the system to relearn the new pressures.
The light should reset once the system has successfully relearned the tire pressures.
What to do if the light stays on or returns
If the light remains illuminated after following the reset procedures, recheck tire pressures again when tires are cold, ensuring all tires are at the recommended levels. If pressures are correct and the light remains on, there may be a faulty sensor or a leak that needs professional attention. In that case, consider visiting a Honda dealer or a qualified tire shop to diagnose TPMS sensors or seals.
Additional tips for a smooth reset
Other factors can affect TPMS readings, such as tire repairs, rotating wheels, or using a spare tire. After any tire service, always perform a reset and drive to relearn the sensor data. Maintain regular tire pressure checks to keep the system accurate and avoid nuisance warnings.
Summary
Resetting the tire pressure light on a Honda Civic typically involves inflating all tires to the recommended pressures and using either a TPMS reset button or the vehicle’s calibration settings. If your Civic has a TPMS button, use it as directed; if not, use the Settings/Calibration menu. After resetting, drive at a moderate speed to allow the system to relearn. If the light stays on, recheck pressures and consult a technician to inspect sensors and valves.
Where is the TPMS reset button on a Honda?
If your Honda is equipped with a TPMS button, you'll find it to the left of the steering wheel.
Why is my tire pressure light still on after filling tires on my Honda Civic?
If the Honda low-pressure tire light is on in your car, truck, or SUV even after you've made sure that your tires have the correct amount of air, you'll need to reset the Tire Pressure Monitoring System (TPMS).
How do you clear check tire pressure from a Honda Civic?
Wait for the options to come up. Press the home button. And go to Whoops Daisy settings third one down. And then we're going to go into vehicle this one here.
How do I get rid of low tire pressure warning on my Honda?
Step the calibration. Process will finish automatically within a few miles of driving. See your vehicle's owner's manual for more details or go to owners.honda.com for a downloadable.