The typical cost to replace a crankshaft position sensor (CKP) on a 2001 Honda Accord is usually about $150 to $350, depending on parts choice and labor rates. This baseline reflects common repair scenarios for the 2.3-liter four-cylinder engine that powered many US-spec Accords in 2001, with higher figures if timing components or wiring repairs are required.
The 2001 Accord offered primarily a 2.3-liter four-cylinder engine, with a V6 in some markets. The crankshaft position sensor monitors engine speed and position and is a wear-related component that, when failing, can cause symptoms such as misfiring, stalling, no-start conditions, or an illuminated check-engine light. Prices vary by region, shop, and whether you choose OEM or aftermarket parts. The following breakdown lays out typical ranges and factors to consider.
Cost overview
Understanding the main cost drivers helps you estimate the total price before service. The list below captures the usual components of a CKP replacement bill.
- Parts: The CKP sensor itself typically costs between $15 and $120, depending on whether you use aftermarket or OEM parts and the engine variant.
- Labor: Expect about 1 to 2 hours of labor in a typical shop, though some engines may require more time. Labor rates commonly range from about $75 to $150 per hour depending on location and shop.
- Diagnostic/inspection: Some shops charge a diagnostic fee if you bring the vehicle in with symptoms but don’t proceed with the repair; others waive it if you proceed with the repair.
- Additional work: If access to the sensor requires removing belts, covers, or even timing components, or if wiring/harness repair is needed, the cost can rise above the baseline.
In most CKP-replacement cases not involving major ancillary work, the total typically falls in the $150–$350 range. Higher totals are possible in regions with steep labor rates or when OEM parts are chosen for a stricter warranty.
What affects the price
Several factors can cause price swings beyond the basic replacement. Here are the most influential ones.
- Engine variant: The 2001 Accord’s 2.3-liter four-cylinder and any applicable V6 versions use different sensor designs and placements, which can affect access time and part cost.
- Access and labor intensity: If the sensor sits behind timing covers, belts, or other components, more labor hours are needed to reach and replace it.
- Parts choice: OEM (dealer) parts typically cost more than aftermarket equivalents, but may come with longer warranties.
- Regional labor rates: City and metro areas tend to charge higher hourly rates than rural shops.
- Electrical harness condition: Damaged connectors or wiring may require harness repairs or replacement, adding to both parts and labor.
Because all of these factors can combine, the final price can vary significantly from the baseline estimate.
What to expect at the shop
Here is a typical sequence you might encounter when replacing a CKP sensor on a 2001 Accord.
Before starting, the technician will confirm the fault with diagnostic codes (commonly P0335 or related codes) and symptoms. Then access to the sensor is gained, which may involve removing the serpentine belt and, in some cases, portions of the timing cover or related components. The old sensor is replaced, the wiring harness checked or replaced if needed, and the system is tested to verify a correct signal. Finally, a road test is performed to ensure the issue is resolved and no new driveability problems remain.
Typical job duration is around 1–2 hours for a straightforward replacement; more complex access can push the time longer. Expect the shop to quote a written estimate before starting any work, including labor and parts, and to outline any potential add-ons if they discover other issues during the repair.
Regional price ranges and warranties
Prices can vary by region and by the source of parts. Here’s a general sense of what customers see in the United States, with notes for other regions.
- Parts: Approximately $15–$120 for the CKP sensor itself, with OEM parts typically at the higher end.
- Labor: About 1–2 hours of labor, with regional hourly rates commonly ranging from $75 to $150.
- Total range: Roughly $150–$350 for CKP replacement alone; higher if timing components or wiring repairs are necessary, or if you opt for dealer service.
Many shops offer warranties on both parts and labor (often 12 months or 12,000 miles), and some include a limited warranty on the electrical components. Always confirm the warranty terms when you receive your estimate.
Summary
For a 2001 Honda Accord, replacing the crankshaft position sensor typically costs between $150 and $350, depending on engine variant, access, parts choice, and regional labor rates. Costs rise if additional work is required on timing components or wiring. Obtain a detailed written estimate before service, and consider whether OEM parts and a shop warranty align with your priorities for reliability and coverage.