Typically about 4.0 quarts (3.8 liters) of engine oil, including the filter, for the CX-3’s 2.0-liter engine. Exact capacity can vary by model year and market.
In practice, the CX-3 commonly uses Mazda’s 2.0L SKYACTIV-G engine, and the published oil capacity reflects a standard oil change with the filter included. For the precise figure for your vehicle, consult the owner’s manual or Mazda’s official service data for your VIN, since regional specs can differ slightly.
Oil capacity overview
Below are the typical figures used in service data for CX-3 configurations where the 2.0L engine is standard. Values assume a standard oil change with the filter replaced.
- 2.0L SKYACTIV-G engine (most CX-3 models): 4.0 qt (3.8 L) of oil with filter
Note that this capacity can vary by region and year. Always verify the exact specification in your owner’s manual or Mazda official data for your vehicle.
Oil type and maintenance basics
Recommended oil: Mazda generally specifies SAE 0W-20 synthetic oil for the 2.0L SKYACTIV-G in most markets. Driving conditions and climate can influence change intervals, which are typically around 5,000–7,500 miles (8,000–12,000 km) depending on usage. Always follow the exact guidance in your manual.
Summary
For a typical CX-3 with the 2.0L engine, plan on about 4.0 quarts of engine oil, including the filter. Always confirm with your vehicle’s manual or official Mazda data to account for year- and region-specific variations.