Expect the part to cost roughly $150–$350 for an aftermarket remanufactured power steering pump, with OEM new pumps commonly $400–$600. Installed, total costs typically range from about $450–$900, depending on labor rates and your location.
Understanding the part price
The following list outlines the main pricing tiers you’ll encounter when shopping for the pump.
- OEM new pump (Honda-branded): typically $400–$600
- Aftermarket remanufactured pump (Cardone, Denso, UCI, etc.): typically $150–$350
- Used or gray-market/refurbished units: typically $100–$200
- Core charges may apply for remanufactured units; usually $0–$50 refundable
In short, the part price varies by supplier and condition. OEM is the pricier option, while aftermarket remanufactured units offer substantial savings with usually similar fit.
Installed cost and labor considerations
The total installed price depends on labor time and local shop rates. Here are typical ranges for a 2006 Accord:
- Estimated labor time: about 2–4 hours
- Labor rate: roughly $70–$120 per hour (varies by region and shop)
- Labor cost range: approximately $140–$480
- Additional parts or tasks: belt/pulley kit, hoses, reservoir, or power steering fluid flush may be needed
- Additional fees: diagnostic charges, taxes, shop fees
In practice, adding a belt replacement, hoses, or a fluid flush can push the installed cost toward the higher end, especially at a dealership or specialty shop.
OEM vs aftermarket: what to expect
Choosing between an OEM Honda pump and an aftermarket remanufactured unit affects cost, warranty, and perceived reliability. Consider:
Warranty and reliability
- OEM new pump: guaranteed fit and typically longer warranty; higher upfront price (roughly $400–$600)
- Aftermarket remanufactured pump: lower upfront cost (roughly $150–$350); usually 1–2 year warranty; similar fit, but quality can vary by brand
- Used/gray-market units: cheapest option with higher risk and limited or no warranty
Always verify compatibility with your Accord’s engine code and VIN to avoid mismatches before purchasing.
Where to shop and how to verify fit
To compare prices and ensure correct fit for a 2006 Honda Accord (4‑cylinder or V6), check multiple sources and confirm compatibility:
- Honda dealership parts or official OEM retailers
- Auto parts chains (AutoZone, O'Reilly, NAPA) and online retailers (RockAuto, PartsGeek)
- Cross-check part numbers for your engine variant (2.4L 4-cylinder vs. 3.0L V6) and pulley/reservoir requirements
- Ensure the price includes necessary components (pulley, reservoir, hoses) if applicable
Ask for a price that includes the pulley, reservoir, and any hoses to avoid missing parts after purchase.
What to do next
If you’re facing a failing power steering pump, start with a basic check for leaks and inspect the belt for wear. If the belt is slipping or the pump whines or struggles to steer, replacement may be needed. Consider these steps:
- Obtain multiple written quotes from reputable shops
- Decide on OEM vs aftermarket based on budget and expected longevity
- Ask about warranty coverage, what parts are included, and whether a fluid flush is recommended
If you’re comfortable with DIY work and have the right tools, you can replace a remanufactured pump yourself; however, bleeding the system and correct belt tension are critical for proper operation.
Summary
For a 2006 Honda Accord, the power steering pump costs typically range from $150–$350 for an aftermarket remanufactured unit or $400–$600 for a new OEM pump. Installed total costs usually run about $450–$900, influenced by labor rates, added components, and whether you choose OEM or aftermarket parts. Verify compatibility with your exact engine variant and VIN, compare several retailers, and weigh upfront price against warranty and reliability. When in doubt, seek a written estimate from a qualified shop and consider a motor‑belt and fluid‑related checks to rule out alternative causes of steering issues.