For a Chrysler 200, a typical set of windshield wiper blades costs roughly $15 to $40, depending on length and brand. Premium OEM or specialty beam-style blades can cost more, while basic options are cheaper.
The Chrysler 200, produced from 2011 to 2017, generally uses two different front blade sizes. The driver-side blade is usually longer than the passenger-side blade, with exact lengths varying by year and trim. To ensure a proper fit, check the size printed on the current blades or consult the owner's manual or a retailer’s fit guide before purchasing.
Common blade sizes for the Chrysler 200
Blade lengths you’ll encounter most often come in two sizes. The driver-side blade is typically longer than the passenger-side blade, but exact lengths depend on the model year.
- Driver-side: commonly 26 inches
- Passenger-side: commonly 20 inches
Because sizes can vary with model year and trim, always verify the specific blade lengths for your vehicle before buying.
Price ranges by blade type
Blade prices vary by brand and quality. The following ranges are typical for the Chrysler 200 and are listed per blade (most buyers replace in pairs):
- Budget/basic blades: about $4–$8 per blade ($8–$16 per pair)
- Mid-range blades (well-known brands): about $8–$18 per blade ($16–$36 per pair)
- Premium/OE or beam-style blades: about $20–$40 per blade ($40–$80 per pair)
Prices can vary by retailer, location, and promotions. Bundles or multipacks can reduce the per-blade cost.
Where to buy and installation options
Wiper blades are widely available from auto parts stores, big-box retailers, and online outlets. Some stores offer free or low-cost installation if you purchase blades there; dealerships sell OEM blades if you want exact factory specifications.
- Auto parts stores (e.g., AutoZone, Advance Auto Parts, O'Reilly)
- Online retailers (e.g., Amazon, RockAuto, manufacturer sites)
- Dealership parts counters for OEM blades
- In-store service bays that install blades on request
Always check for promotions and return policies if a blade doesn’t fit or perform as expected.
How to ensure you buy the right fit
To avoid buying the wrong blades, confirm the correct lengths and blade style for your Chrysler 200’s year and trim. Follow these steps:
- Inspect the current blades for length markings or model information.
- Consult the owner's manual or a fit guide from Chrysler or a trusted retailer.
- Use retailer tools that let you enter your vehicle details to verify fit.
- Compare blade construction (frame vs. beam) and select an equivalent blade.
Accurate sizing and blade type help ensure proper contact, quiet operation, and long-lasting performance.
Summary
In short, expect to spend roughly $15 to $40 per pair for most Chrysler 200 wiper blade replacements, with higher-end OEM or beam-style options costing more. Sizes typically run around 26 inches on the driver side and 20 inches on the passenger side, though you should verify for your year. You can buy from auto parts stores, online retailers, or the dealer, and installation is often available at the point of sale. Always confirm fit using the vehicle’s manual or retailer fit guides.
How much do wipers usually cost?
The average cost for a windshield wiper replacement costs between $50 and $61 including parts and labor and before taxes and fees.
What year to stay away from Chrysler 200?
Engine Concerns: Excessive oil consumption is a well-documented issue with certain Chrysler 200 engines. Most notably, the 2.4L Tigershark engine used in the 2015 and 2016 models has been a source of complaints.
How much does it cost to replace a windshield on a Chrysler 200?
$199 to $479
Replacing a Chrysler 200 windshield can cost anywhere from $199 to $479 for standard glass, or up to $829 if your vehicle has advanced safety systems that require calibration.
What size windshield wipers go on a Chrysler 200?
For 2015‑2017 Chrysler 200 Windshield Wiper Blades 2 Pack Michelin Pro Plus Silicone 26 & 19 inch Size.