Brakes for a Genesis typically cost a few hundred dollars per axle for pads, and replacing rotors adds more; a full four-wheel brake job (pads and rotors on both axles) often runs roughly $600 to $1,500 depending on model, parts choice, and labor rates. The exact price varies by model and whether you replace just pads or include rotors and sensors.
Brake costs by component
Below are typical price ranges you can expect for common brake components on Genesis vehicles, depending on whether you choose OEM or aftermarket parts and assembly options.
- Brake pads (per axle): OEM-style pads commonly around $120–$180; aftermarket or ceramic options can range from $150–$300 per axle.
- Brake rotors (per rotor): Standard iron rotors usually $60–$120 each; OEM or performance rotors can be $100–$180 each; front rotors tend to be larger and cost more.
- Brake sensors and hardware: Wear sensors and related hardware typically $15–$40 per sensor; many pad kits include hardware with pads.
The costs above illustrate how parts type and vehicle configuration influence overall pricing. Real-world prices vary by region, seller, and whether you purchase as part of a service package or a standalone parts order.
Labor costs and time to perform brake work
Labor can significantly affect total price, especially if you need rotor replacement or a full brake job on both axles. Here are typical labor-time and rate ranges to consider.
- Labor time (pads-only per axle): roughly 0.5–1.0 hours; rotor replacement adds about 0.5–1.0 hours per axle if needed.
- Shop labor rates: Independent shops commonly charge $70–$120 per hour; dealerships may charge $110–$180 per hour, depending on location and model.
- Estimated labor cost (two axles): pads-only about $140–$240; pads+rotors about $280–$700; four-wheel brake jobs can range from $500–$1,400 or more depending on parts and rates.
Labor costs vary by technician expertise, region, and whether any special tools or brake hardware are required (e.g., for electronic parking brakes or caliper replacements in newer Genesis models).
Model-specific considerations
Genesis vehicles with regenerative braking (notably some electric and plug-in variants) may experience different wear patterns compared to traditional internal-combustion models, potentially reducing pad replacement frequency. The latest Gen models and trims (like GV60 and newer electrified lines) can affect brake service pricing due to brake-by-wire systems and sensor configurations.
In practice, many Genesis owners pay a combined price in the mid-range, often around $600–$1,200 for front and rear pads and rotors on both axles with standard parts at an independent shop; dealer service can push the total higher, around $1,000–$2,000 depending on location and options. The best way to get an accurate quote is to request a brake inspection quote from a local Genesis dealership or trusted repair shop, specifying your exact model and trim.
Summary: For Genesis brake work, expect variability by model, parts choice, and labor rates. Pad-only replacements are the least expensive, rotor-inclusive jobs are more, and full four-wheel brake jobs can be significant if you opt for OEM ceramic pads or premium rotors. Always ask for itemized estimates and check if sensors or electronic brake hardware are included or require separate parts.
Summary of pricing at a glance
Key takeaways for quick reference:
- Pads per axle: roughly $120–$180 for OEM, up to $300 for ceramic or performance options.
- Rotors per rotor: roughly $60–$120 for standard; $100–$180 for OEM/performance variants.
- Labor per hour: $70–$180 depending on shop type and region.
- Two-axle job (pads only): roughly $140–$240 in labor plus parts; two-axle job (pads+rotors): roughly $300–$700; four-wheel job can be $800–$2,000+.
As a quick reference, you can use these ranges to compare quotes and decide whether you want OEM or aftermarket parts and whether you prefer dealer service or an independent shop. Always confirm whether the price includes sensors, core charges, and installation.
End of article: For an exact quote, contact a Genesis dealership or trusted repair shop with your model and trim details. Prices vary by region, model year, and whether your vehicle uses standard hydraulic brakes or brake-by-wire systems.