Oil capacity varies by model and engine. Most 2019 Jeep engines require between about 5 and 8 quarts of oil, with the widely used 3.6L V6 typically needing 6 quarts. Always check the owner’s manual or under-hood label for your exact configuration.
Engine-wide oil capacities in the 2019 lineup
The following list shows typical oil capacities by engine used in 2019 Jeep models. Capacities are for a standard fill with a new filter; exact values can vary with trim, oil type, or if a different filter is installed. Verify your specific requirement in the owner’s manual or on the under-hood sticker.
- 3.6L Pentastar V6 — approximately 6 quarts with filter (recommended oil: 5W-20 or 0W-20, depending on model year guidance).
- 2.0L Turbo I4 (eTorque mild-hybrid setup) — about 5 quarts with filter.
- 3.0L EcoDiesel V6 — about 7 quarts with filter.
- 5.7L Hemi V8 — about 7 quarts with filter.
- 2.4L Tigershark I4 — about 5 quarts with filter.
In summary, the oil capacity for a 2019 Jeep hinges on the exact engine. Gasoline V6 and four-cylinder variants cluster around 5–7 quarts, while diesel variants push closer to 7 quarts or more. Always rely on the official spec for your exact trim and VIN.
How to verify the exact capacity for your vehicle
To ensure you use the correct amount of oil, consult the owner’s manual, the under-hood information label, or a Jeep dealership. Engine configurations and optional equipment can alter the required fill. When purchasing oil, heed the recommended viscosity and grade for your engine, and consider whether you’re using a standard filter or an oversized filter, which can affect capacity slightly.
Practical notes for maintenance
Oil capacity is a starting point for planning an oil change. Always replace the oil filter with each oil change, use the correct viscosity, and account for any oil you may spill or lose during maintenance. If you’re unsure, have a professional service technician confirm the exact specification for your 2019 Jeep model.
Summary
Oil capacity in the 2019 Jeep lineup ranges from about 5 to 7 quarts for most gas engines (with 6 quarts being common for the 3.6L V6), and around 7 quarts for EcoDiesel and Hemi V8 options. The 2.0L turbo generally sits near 5 quarts. Because exact figures depend on the model, engine variant, and filters, always verify with the owner’s manual or the under-hood sticker for your specific vehicle.
At what mileage do jeeps break down?
Yes, the Jeep Wrangler is built to last an impressive 15–20 years and often reaches 200,000–300,000 miles or more with proper maintenance. Factors like routine service, smart driving habits, and environmental conditions play a major role in how long a Wrangler will stay on the road.
How many quarts of oil does a 3.6 L V6 Jeep Wrangler use?
5.0 quarts
Quick Reference: Oil Type by Year & Engine
| Model Year | Engine | Capacity |
|---|---|---|
| 2018-2026 | 3.6L V6 Pentastar | 5.0 quarts |
| 2018-2026 | 2.0L Turbo I4 | 5.0 quarts |
| 2020-2026 | 3.0L EcoDiesel V6 | 9.0 quarts |
| 2021-2026 | 6.4L V8 (Rubicon 392) | 7.0 quarts |
What kind of oil does a 2019 Jeep Cherokee V6 take?
6 Liters of Fully Synthetic Eurol Evolence 5W20 Motor Oil - Meets or exceeds the recommended Chrysler MS-6395 oil quality specification and performance characteristics required for the Jeep Cherokee 3.2L V6 engine.
How much oil does a 2019 Jeep take?
2019 Jeep Wrangler Oil Type
2.0L Turbo Engine: SAE 5W-30 Full Synthetic (API SN Plus) — 5.5 quarts with filter. 3.6L V6: SAE 0W-20 Full Synthetic (API Starburst) — 5 quarts with filter.