The rear wiper blade size for a 2008 Honda CR-V is 11 inches.
Understanding the rear wiper setup on the 2008 CR-V
In 2008, the CR-V uses a single rear wiper blade mounted on the tailgate. This third‑generation model (produced from 2007 to 2011) typically uses an 11‑inch blade, which is sized to clear the rear window efficiently without overhang or gaps. Getting the correct size matters for proper contact with the glass and effective wiping in wet conditions.
How to confirm you have the right size
If you're unsure about the blade size, you can verify by measuring the current blade, checking the vehicle’s owner’s manual, or looking at replacement blade packaging. The standard rear blade for this model year is 11 inches (28 cm) from tip to tip, but packaging and connector styles can vary among aftermarket options.
Replacement options
There are several reliable choices when replacing an rear blade for the 2008 CR-V. The options below cover OEM and reputable aftermarket blades that fit the model years around 2007–2011.
- OEM Honda 11-inch rear wiper blade compatible with 2007–2011 CR-V models
- Aftermarket 11-inch rear wiper blades from brands such as Bosch, Rain-X, or Trico
When shopping, ensure the blade length is 11 inches and that the blade’s connector matches your wiper arm.
Connector compatibility
Most 11-inch rear blades use a standard connector, but some aftermarket options may require a small adapter. Check the packaging or product description to confirm the connector type matches your CR-V’s wiper arm.
Installation tips
To replace the blade, follow these quick steps. The process is straightforward and can be completed in just a few minutes with minimal tools.
- Lift the wiper arm away from the glass until it rests on its hinge.
- Release the old blade from the wiper arm by pressing the locking tab or sliding the blade out of its connector.
- Attach the new blade to the arm by sliding it into the connector until it clicks securely.
- Lower the wiper arm back against the glass and test the sweep to ensure proper contact.
Tip: Some aftermarket blades come with adapters; if needed, choose an adapter that matches your CR-V’s wiper arm style.
Summary
The rear wiper blade on a 2008 Honda CR-V is 11 inches in length. Use either OEM or trusted aftermarket blades, verify the connector type, and follow the installation steps to ensure a proper fit and clear rear visibility in wet weather.
How do I know what size rear wiper blade I need?
You can also find the wiper blade size within your vehicle's owner's manual. If you don't have a printed copy of this, they can often be found online.
What size are the rear wiper blades on a Honda CRV?
Rear Wiper Blades 12 + 12 inch, Genuine OE for Honda CRV 2017-2022 and more…
How to replace rear windshield wiper on 2008 Honda CRV?
Just like that push it into the slot there. And then twist it down just like that. And then push it down.
What size rear wiper blades for Honda CRV 2008?
14"
Product Summary: for Honda CR-V CRV MK3 2007-2011, 14" Rear Wiper Blade and Arm Set Kit Windshield Windscreen Tailgate Window.