The 2.4 L Renegade’s engine typically requires about 5 quarts of engine oil (roughly 4.7 liters) when performing an oil change with a new filter. Exact capacity can vary slightly by year, trim, and regional specifications.
Understanding the oil capacity for this engine involves noting that the Tigershark 2.4-liter I4 is used across several FCA/JEEP models, and small differences in filters, accessories, and climates can influence the precise amount. For the most accurate figure, consult your owner’s manual or a Jeep service adviser for your specific vehicle VIN.
What you should know about capacity
Official service data commonly lists an oil capacity of about 5.0 quarts (4.7 liters) for a full oil change with a filter on the 2.4 L Tigershark engine found in the Renegade. This figure represents the amount needed to fill the engine after replacing the filter and completing the change. If you are only topping up between full changes, the amount needed will depend on your dipstick readings and may be less than the full capacity.
Why capacities can differ
Capacities can vary slightly by model year, market, and whether any engine updates or aftermarket components are used. While 5.0 quarts is the commonly cited figure for many Renegade 2.4 L engines, some owners and service guides note small variations. Always verify with the official documentation for your exact vehicle.
How to confirm for your vehicle
To ensure you use the correct amount for your specific Renegade, take these steps: check the owner’s manual for your model year, look for an under-hood oil capacity sticker, or ask a Jeep dealership or certified mechanic. When performing an oil change, use the recommended oil specification for your engine, install a new filter, fill toward the full mark on the dipstick after the engine has circulated oil, and recheck the level after a brief idle period.
Summary
For a Jeep Renegade with a 2.4 L Tigershark engine, the typical oil capacity is about 5 quarts (4.7 liters) with a filter during a full oil change. Exact figures can vary by year and configuration, so consult the manual or a dealer to confirm for your specific vehicle. Always follow proper change procedures and verify the oil level with the dipstick after service.