The 2011 Honda Accord uses a standard spin-on oil filter, but the exact part number depends on the engine: the 2.4L four-cylinder typically uses part 15400-PLM-A02, while the 3.5L V6 commonly uses part 15400-RAA-A01. Always verify with your vehicle’s VIN or the existing filter to be certain.
Engine options in the 2011 Accord
The 2011 model year offered two main powertrains, each using a compatible spin-on oil filter but with different OEM part numbers. Confirming the precise part number for your car is important, as production changes can alter which filter is specified for a given VIN.
2.4L four-cylinder
The 2.4L four-cylinder engine (K-series) typically uses Honda’s spin-on oil filter, commonly listed as 15400-PLM-A02 in OEM catalogs. Use this part for most 2011 Accords with the 2.4L engine, but verify the exact number via VIN or the current filter if you’re unsure.
To verify the exact filter for your car, you can use one of these methods:
- Look up the VIN in Honda Parts Online or at a Honda dealer to view the recommended oil filter for your specific vehicle.
- Inspect the current filter in your engine bay and read the part number stamped on the filter can.
- Check the packaging on a replacement filter you plan to install; the packaging usually lists compatible vehicles or engines.
In practice, the 2.4L Accord generally adheres to a standard spin-on filter design with threads and dimensions common to Honda K-series engines. Always confirm the exact OEM number to avoid mismatches.
3.5L V6
The 3.5L V6 engine (J-series) commonly uses Honda’s spin-on oil filter, with the OEM part number 15400-RAA-A01 appearing in many 2011-era catalogs. As with the 2.4L, verify the exact part number for your specific vehicle using VIN or by checking the current filter.
To verify the exact filter for this engine, you can use the same methods described above. Aftermarket filters that match the same thread size and are rated for Honda oil systems can be used if they meet the required specifications.
Aftermarket options and cross-references
If you prefer aftermarket filters, several brands offer compatible options for the 2011 Accord. When choosing, ensure the filter matches the 3/4-16 thread and has adequate oil capacity and filtration rating. Always check the packaging for compatibility with your specific engine code and year.
- Respectable aftermarket brands (e.g., Fram, Bosch, Mobil 1, Wix, Mann) often provide filters that fit Honda engines, but verify the exact model number and compatibility.
- Avoid filters that do not clearly specify Honda/Acura compatibility or that do not meet the engine’s flow and filtration requirements.
In practice, many drivers choose a reputable aftermarket filter that lists Honda/Acura compatibility and matches the engine’s thread size and filter dimensions. If in doubt, consult a trusted mechanic or refer to the manufacturer’s cross-reference guide.
Summary
The 2011 Honda Accord uses a spin-on oil filter, with the exact OEM part number depending on the engine: 15400-PLM-A02 for the 2.4L and 15400-RAA-A01 for the 3.5L. Always confirm using the vehicle’s VIN, the current filter, or official parts lookup to ensure the correct replacement. Aftermarket filters can be used when they match the correct thread size and specifications, but verify compatibility to avoid issues.
What is the part number of the Honda oil filter?
15400-PLM-A02
Genuine Honda Oil Filter - 15400-PLM-A02.
What kind of oil filter does a 2011 Honda Accord use?
FRAM Drive – Spin-on Oil Filter: Ideal for Conventional Oil, Protection up to 7,500 miles (Part No. FD7317)
What kind of oil does a Honda Accord 2011 use?
The recommended Honda Accord oil is generally a synthetic 0W-20 formula.
What oil filter does a Honda Accord take?
15400-PLM-A02) Genuine Honda original equipment oil filter for your Honda vehicle. Engineered and specified by Honda, this is the same filter as that which would be installed by your dealer.