What air filter does a 2013 Honda Accord take?

The 2013 Honda Accord uses two separate filters: an engine air filter for the intake system and a cabin air filter for the HVAC system. The exact engine filter part number depends on whether the car has the 2.4-liter inline-4 or the 3.5-liter V6 engine.

In this article, we break down which filters you’ll need, where to locate them, how to confirm the correct part number for your VIN, and tips for replacement. We also cover how to buy OEM versus aftermarket options and how to tell when it’s time to replace them.

Engine air filter

The engine air filter sits in the plastic air box under the hood and screens dust and debris from entering the engine. The specific filter you need varies by engine variant, so it’s important to verify which powertrain your Accord has.

• 2.4L inline-4 engine (most non-V6 trims): Honda OEM engine air filter part number 17220-R40-A00 (or an equivalent aftermarket replacement).


• 3.5L V6 engine (top trims): Honda OEM engine air filter part number 17220-R40-A01 (or an equivalent aftermarket replacement).


• If you’re unsure which engine your car has, check the VIN or the engine bay label and use a VIN-based parts lookup to confirm the exact replacement part.

Choosing the right engine air filter is important for performance and fuel efficiency. Always opt for an OEM replacement or a reputable aftermarket filter that matches the vehicle’s specifications.

Cabin air filter

The cabin air filter cleans the air entering the passenger compartment through the HVAC system. It’s tucked behind the glove box, and the exact part number can vary by region and trim level. If you’re replacing this filter, be sure to verify the correct size and fit for your specific car.

• Common OEM options used for the 2013 Accord include cabin air filter part numbers such as 80292-S01-000 or 80292-S01-003 (verify with your local dealer or parts catalog for the exact match by VIN).


• Aftermarket cabin filters from brands like Fram, Bosch, or Mann can fit the same panel-type housing, but always confirm the dimensions and HVAC compatibility before purchasing.


• To confirm you have the right filter, pull the old one and compare size and orientation, or use a VIN-based lookup through a parts retailer.

Cabin filters are generally inexpensive and straightforward to replace. Many drivers replace them every 15,000 miles (or about once a year) depending on driving conditions, traffic, and area dust levels.

Replacement steps

Below are general, high-level steps for replacing both filters. If you’re new to car maintenance, consult your owner’s manual or a trusted technician for model-specific guidance.

1. Engine air filter replacement:
   
   
   
   1. With the hood up, locate the air intake box on the engine side of the firewall or near the front edge of the engine bay.
   
   
   2. Unclip or unscrew the top of the air box and remove the old filter element.
   
   
   3. Clean any debris from inside the box, insert the new filter with the correct orientation, and reseal the box.
   
   
   4. Secure the air box cover and ensure the clips or screws are firmly fastened.
   
   
   
   


2. Cabin air filter replacement:
   
   
   
   1. Open the glove box and remove any stops or contents to access the cabin filter cover behind it.
   
   
   2. Open the cabin filter housing, remove the old filter, and note the airflow direction printed on the new filter.
   
   
   3. Insert the new filter in the correct orientation, reattach the housing, and reassemble the glove box.
   
   
   4. Test the HVAC system to confirm proper airflow and no unusual noises.
   
   
   
   

Regular replacement helps maintain interior air quality and HVAC efficiency. If you’re shopping online, double-check the fit by using your VIN or the exact trim details of your car.

Summary

For a 2013 Honda Accord, expect two filters: an engine air filter (with part numbers that vary by engine: 2.4L ≈ 17220-R40-A00, 3.5L ≈ 17220-R40-A01) and a cabin air filter (commonly 80292-S01-000 or 80292-S01-003, among others, depending on region). Always verify the correct part with your VIN or by consulting the dealer or a reputable parts retailer. Regular replacement—typically every 15,000 miles for cabin filters and 15,000–30,000 miles for engine filters, depending on driving conditions—helps maintain performance and interior air quality.