There isn’t a single oil capacity for all 2012 Nissans—the amount depends on the model and engine. In general, most 2012 Nissan engines require roughly 4.5 to 5.5 quarts of oil with a filter, with the exact figure listed in the owner’s manual for your specific model and engine code.
Why the capacity varies across models
Different engines have different lubrication needs. A four‑cylinder setup typically uses a bit less oil than a V6, and some trims may include variations that affect capacity. The official specification is the best source for your vehicle.
Below are typical capacities by engine type to illustrate the range.
- 4‑cylinder engines (common in many 2012 Nissans): approximately 4.5 to 5.0 quarts with a filter.
- V6 engines (found in models like higher trims): approximately 5.0 to 5.7 quarts with a filter.
Note: These are general ranges. The exact number for your vehicle is in the owner’s manual or service documentation. Use the dipstick and the vehicle’s oil change specifications to ensure accuracy.
How to determine the exact capacity for your specific 2012 Nissan
To pinpoint the precise quantity for your vehicle, follow these steps:
- Identify your exact model and engine code. Check the owner’s manual or the information on the door jamb sticker for the engine size.
- Look up the official oil capacity for that engine in the manual or on Nissan’s official support/documentation for your vehicle’s year and engine code.
- If needed, contact a Nissan dealer or a trusted automotive reference with your VIN to verify the specification.
- During an oil change, add the recommended amount and verify the level with the dipstick after the oil has circulated.
Concluding: The most reliable source is your vehicle’s official manual or Nissan’s service documentation. If you share your exact 2012 Nissan model (for example, Altima, Rogue, Sentra) and engine, I can provide the precise capacity for your car.
Summary
2012 Nissan oil capacity is model- and engine-dependent, typically ranging from about 4.5 to 5.5 quarts with a filter. There isn’t a universal number for all 2012 Nissans. To be sure, consult the owner’s manual or official Nissan specifications for your exact model and engine code, and verify the level with the dipstick after an oil change.
What type of engine oil for 2012 Nissan Sentra?
2019–2013: 0W-20 full synthetic. 2012–2007: 5W-30 (synthetic or conventional; we recommend synthetic).
How much oil does a 3.5 L V6 Nissan take?
about 5.1 quarts
2015–2024 Nissan Murano oil type (third generation, 3.5L V6)
Preferred oil type: SAE 0W-20 full synthetic motor oil. Alternate oil type: SAE 5W-30 is usually acceptable if 0W-20 is not available, but 0W-20 is preferred. Approximate oil capacity: about 5.1 quarts with a filter change.
What kind of oil does a 2012 Nissan take?
Mobil 1 – European Car Formula Advanced Full Synthetic Motor Oil 5W-30, 5 Quart (Part No. 127105)
What type of oil does a 2012 Nissan Rogue take?
5W-30
For the first-generation Rogue (2008–2013), Nissan recommended 5W-30.