The 2020 Kia Telluride with the 3.8-liter V6 engine takes 5.5 quarts of engine oil when performing a full change with the filter installed.
For owners and service professionals, this figure guides how much oil to purchase and how to perform a proper oil change. The following details break down the official capacity, the recommended oil type, and practical tips for maintaining the Telluride’s lubrication system.
Official capacity and what it covers
This section explains the exact quantity you need for a standard drain-and-fill with a new filter, and what that quantity includes.
- Oil capacity with filter: 5.5 quarts (approximately 5.2 liters).
- Recommended oil grade: SAE 5W-30 full synthetic.
- Capacity notes: The 5.5-quart figure assumes a complete drain and replacement of the oil filter; using a different filter or oil brand may cause a slight variation.
When performing the service as described, top off to the full mark on the dipstick to ensure proper lubrication and engine performance.
Practical considerations for maintenance
Knowing the exact capacity helps with purchasing the right amount of oil, budgeting for service, and avoiding under- or overfilling, which can affect engine health and performance.
Additional reminders for Telluride owners
Always verify the exact capacity and specifications in the owner's manual or Kia’s official service materials for your specific build and locale. If you use alternate filters or special editions, the total may vary slightly, but 5.5 quarts is the standard figure for the 2020 Telluride 3.8 L.
Summary: For the 2020 Kia Telluride with the 3.8 L V6, plan on 5.5 quarts of engine oil with a filter, using SAE 5W-30 full synthetic. Confirm exact figures with the manual or a Kia dealer, especially if your vehicle has any regional variations or aftermarket parts.