The tire pressure light on a 2013 Honda Accord is usually turned off by inflating all tires to the recommended cold pressures and allowing the TPMS to relearn. If the light remains on, you may need to reset the system or check for faulty sensors.
What the TPMS Light Means
The tire pressure monitoring system (TPMS) warns you when any tire is underinflated or when there’s a sensor problem. On a 2013 Accord, the light typically appears amber on the dash and can stay on if a tire is low, a sensor fails, or the system needs to relearn after changes in tire pressure.
Prepare the Tires
To give the system a proper chance to relearn, start by bringing every tire, including the spare if your model uses it in the TPMS, to the recommended cold pressure shown on the driver’s door jamb placard or in the owner’s manual.
- Check the current tire pressures when the tires are cold (before driving more than a mile or two).
- Inflate each tire (and the spare, if applicable) to the specified cold pressure.
- Ensure valve caps are in place and there are no obvious leaks.
Once pressures are set, proceed to reset or relearn the TPMS.
Resetting or Relearning the TPMS
There are two common ways the 2013 Honda Accord can relearn the tires after inflation. Use the method your car supports.
- Method A: With the ignition on (engine off), locate the TPMS/RESET button on the instrument panel or lower dashboard. Press and hold it until the indicator light on the dash blinks or a confirmation message appears, then release. Drive the car at a steady speed (above 40–50 mph / 65–80 km/h) for about 10 minutes to complete the relearn.
- Method B: If your model lacks a reset button, simply drive at highway speeds for 10–15 minutes; the system should relearn automatically as the sensors communicate with the ECU. If the light remains on, a sensor may be faulty.
Note: If you inflate to the correct pressures and still see the light after a reasonable relearn period, check for leaks, damaged sensors, or malfunctioning components. A dealer or qualified technician can diagnose TPMS fault codes and replace failed sensors if needed.
When to Seek Help
Persistent TPMS warnings despite proper inflation and relearn typically indicate a failed sensor, a dead battery in a sensor, or a monitoring module issue. Sensor replacement is common and should be done by a professional to ensure accuracy.
Summary
For a 2013 Honda Accord, turning off the tire pressure light is accomplished by inflating all tires to the recommended cold pressures and allowing the TPMS to relearn. If the light persists, use the vehicle’s TPMS reset procedure (if equipped) or drive at highway speeds to auto-relearn, and consider professional service for faulty sensors.
How to clear TPMS light on Honda Accord?
So you're going to do it through this screen right here click your home button we're already on home go to settings. Go to vehicle. Choose your first option TPMS calibration. And then click calibrate.
How to clear tire pressure light on 2013 Honda Accord?
Here. Press this button hold. It. You'll see it flashing. And then it goes off. So now it is calibrated to the 34 PSI that I put it at i think it's recommended.
Why is my tire pressure light still on after filling tires on my Honda Accord?
One of the most common reasons for a TPMS light staying on despite the tires being properly inflated is a sensor malfunction. TPMS sensors are typically located inside the tire and can wear out or become damaged over time, particularly if you've hit a curb, driven through a pothole, or been off-road.
Where is the TPMS reset button on a Honda?
If your Honda is equipped with a TPMS button, you'll find it to the left of the steering wheel.