The 2022 Subaru Ascent uses synthetic 0W-20 engine oil. This applies to the model’s 2.4-liter FA24 turbocharged engine.
For the Ascent’s FA24 engine, Subaru specifies 0W-20 synthetic oil that meets API SN or later standards (ILSAC GF-6). Follow the vehicle’s Maintenance Minder and the owner's manual for exact change intervals and service guidance.
Oil type and viscosity
The following details outline the acceptable oil characteristics for the engine.
- Viscosity: 0W-20
- Oil type: full synthetic
- Standards: API SN or later (ILSAC GF-6 compliant)
Using the recommended 0W-20 synthetic oil that meets these standards helps ensure proper lubrication across temperature ranges and preserves engine longevity.
Maintenance and service guidance
Oil-change timing and checks depend on driving conditions. Subaru provides guidance via the maintenance minder system, but general practice for many drivers is noted below.
- Follow the Maintenance Minder: typical change interval is about every 6,000 miles (6 months) under normal driving; harsher conditions may require more frequent changes.
- In severe service (short trips, extreme temperatures, towing, lots of idling), more frequent changes are recommended.
- Regularly check the oil level (monthly or before long trips) and look for signs of leaks or excessive consumption.
Adhering to these maintenance practices helps ensure the oil stays within the recommended range and engine protection.
Summary
The 2022 Subaru Ascent requires synthetic 0W-20 engine oil, meeting API SN or GF-6 standards, with maintenance guided by Subaru's Minder system and the owner's manual. Sticking to these specifications supports optimal engine performance and longevity.
Does the Subaru Ascent need synthetic oil?
One common question that often arises is, what type of oil does the Subaru Ascent require? Well, the recommended Subaru Ascent oil type is 0W-20 full-synthetic oil.
Do all subarus take 0W-20?
Most new Subaru vehicles require synthetic oil with a viscosity rating of 0W-20. However, the correct Subaru oil type varies depending on the model year, so always consult your owner's manual for the most accurate information. Next, let's compare synthetic vs. conventional oil for Subaru vehicles.
How much oil does a 2022 Subaru Ascent 2.4 L take?
4.8 quarts
A 2022 Subaru Ascent takes 4.8 quarts of oil.
What oil goes in a 2022 Subaru Ascent?
The recommended Subaru Ascent oil type is 0W-20 full-synthetic oil, which offers maximum protection from corrosion and improved gas mileage on Temple Terrace roads.